plumBOSS

818 products


  • plumBOSS Branchforming Tool Kit (No.1) ½-1 inch | KKB01

    plumBOSS Branchforming Tool Kit (No.1) ½-1 inch | KKB01

    Manual Collaring Tools (KK Series) 1 inch Manual Branchforming kit KKB01 Kit Contains ½ inch Branch former ¾ inch Branch former 1 inch Branch former Adjustable Drill 3/8 - 2 1/8 inch Ratchet Wrench Marking Pliers File & Handle Plastic Tool Box The Original KK Hand Operated Branchforming Equipment Eliminates up to 90% of T-fitting purchases Reduces inventory One braze joint replaces 3 soldered joints No need for tube cutting Reduces tube preparation time Less assembly time Reduces scrap on the job 66% fewer joints Less chance for leaks or call backs Branch Puller / Branch Pulling Device

    $1.00

  • plumBOSS Flexi-Saw | WR626

    plumBOSS Flexi-Saw | WR626

    For Two-Handed Use Cuts wood and plastics in awkward locations, where other saws fail, with limited access Omni directional - cuts contours radii and straight lines in any direction Ideal for cutting plastic pipes

    $1.00

  • Hydraulic Pipe Cutter 6 -36 inch Wheeler-Rex | WR-559036

    Hydraulic Pipe Cutter 6 -36 inch Wheeler-Rex | WR-559036

    Hydraulic Pipe Cutter 6"-36" Wheeler-Rex Snap Type Cutter (Hydraulic) Hydraulic Cutters are the solution to cutting larger diameter Cast Iron, Tile and Concrete Pipe. Like the hand operated "snap" cutters, hydraulic cutters are not rotated around pipe. Their remotely operated hydraulic pumps provide the required power. A 2in -3in minimum clearance is all that is needed to wrap cutter chain around pipe. They come complete with pump, hose and case. Snap Type Cutters Employ the "Squeeze and Pop"cutting principle Absolutely the best for work in the trench Great for cutting Cast Iron, Tile and A/C Remote Hydraulic Pump for ease and safety Only requires clearance of 2" to 3" Materials are cut with same wheels Cutter does NOT rotate around the pipe, chain squeezes and pops the pipe Cutters work well in trench or on loose pipe SPECIAL ORDER

    $1.00

  • Hydraulic Pipe Cutter 6 -24 inch Wheeler-Rex | WR-559024

    Hydraulic Pipe Cutter 6 -24 inch Wheeler-Rex | WR-559024

    Hydraulic Pipe Cutter 6"- 24" Wheeler-Rex Snap Type Cutter (Hydraulic) Hydraulic Cutters are the solution to cutting larger diameter Cast Iron, Tile and Concrete Pipe. Like the hand operated "snap" cutters, hydraulic cutters are not rotated around pipe. Their remotely operated hydraulic pumps provide the required power. A 2in -3in minimum clearance is all that is needed to wrap cutter chain around pipe. They come complete with pump, hose and case. Snap Type Cutters Employ the "Squeeze and Pop"cutting principle Absolutely the best for work in the trench Great for cutting Cast Iron, Tile and A/C Remote Hydraulic Pump for ease and safety Only requires clearance of 2" to 3" Materials are cut with same wheels Cutter does NOT rotate around the pipe, chain squeezes and pops the pipe Cutters work well in trench or on loose pipe SPECIAL ORDER

    $1.00

  • Hydraulic Pipe Cutter 4 -24 inch Wheeler-Rex | WR-389024

    Hydraulic Pipe Cutter 4 -24 inch Wheeler-Rex | WR-389024

    Hydraulic Pipe Cutter 4"-24" Wheeler-Rex Snap Type Cutter (Hydraulic) Hydraulic Cutters are the solution to cutting larger diameter Cast Iron, Tile and Concrete Pipe. Like the hand operated "snap" cutters, hydraulic cutters are not rotated around pipe. Their remotely operated hydraulic pumps provide the required power. A 2in -3in minimum clearance is all that is needed to wrap cutter chain around pipe. They come complete with pump, hose and case. Snap Type Cutters Employ the "Squeeze and Pop"cutting principle Absolutely the best for work in the trench Great for cutting Cast Iron, Tile and A/C Remote Hydraulic Pump for ease and safety Only requires clearance of 2" to 3" Materials are cut with same wheels Cutter does NOT rotate around the pipe, chain squeezes and pops the pipe Cutters work well in trench or on loose pipe SPECIAL ORDER

    $1.00

  • Hydraulic Pipe Cutter 4 -18 inch Wheeler-Rex | WR-389018

    Hydraulic Pipe Cutter 4 -18 inch Wheeler-Rex | WR-389018

    Hydraulic Pipe Cutter 4"-18" Wheeler-Rex Snap Type Cutter (Hydraulic) Hydraulic Cutters are the solution to cutting larger diameter Cast Iron, Tile and Concrete Pipe. Like the hand operated "snap" cutters, hydraulic cutters are not rotated around pipe. Their remotely operated hydraulic pumps provide the required power. A 2in -3in minimum clearance is all that is needed to wrap cutter chain around pipe. They come complete with pump, hose and case. Snap Type Cutters Employ the "Squeeze and Pop"cutting principle Absolutely the best for work in the trench Great for cutting Cast Iron, Tile and A/C Remote Hydraulic Pump for ease and safety Only requires clearance of 2" to 3" Materials are cut with same wheels Cutter does NOT rotate around the pipe, chain squeezes and pops the pipe Cutters work well in trench or on loose pipe

    $1.00

  • Hydraulic Pipe Cutter 2-15 inch Wheeler-Rex | WR-299015

    Hydraulic Pipe Cutter 2-15 inch Wheeler-Rex | WR-299015

    Hydraulic Pipe Cutter 2"-15" Wheeler-Rex Snap Type Cutter (Hydraulic) Hydraulic Cutters are the solution to cutting larger diameter Cast Iron, Tile and Concrete Pipe. Like the hand operated "snap" cutters, hydraulic cutters are not rotated around pipe. Their remotely operated hydraulic pumps provide the required power. A 2in - 3in minimum clearance is all that is needed to wrap cutter chain around pipe. They come complete with pump, hose and case. SPECIAL ORDER

    $1.00

  • plumBOSS 12R Hand Threader Set 1/2 -2 inch BSPT | PB-004215

    plumBOSS 12R Hand Threader Set 1/2 -2 inch BSPT | PB-004215

    Drop Heads and Dies are ideal for in-place threading from 1/2" - 2" and are designed to fit Wheeler Ratchet Handle 43310 as well as the Ridge Tool Company Models 12R, OO-R, 111-R, O-R, 30A & 31A, 700 Power Drives, Reed Mfg. DHR12 Series Drop Heads and Berkley Tool BT40000 Series Drop Heads. Set Includes: 1 x Metal Carry Case 1 x Ratchet with Handle 1 x 1/2" BSPT Drop Head with Dies 1 x 3/4" BSPT Drop Head with Dies 1 x 1" BSPT Drop Head with Dies 1 x 1 1/4" BSPT Drop Head with Dies 1 x 1 1/2" BSPT Drop Head with Dies 1 x 2" BSPT Drop Head with Dies

    $1.00

  • plumBOSS 12R Hand Threader Set 1/2 -2 inch NPT | PB-004200

    plumBOSS 12R Hand Threader Set 1/2 -2 inch NPT | PB-004200

    plumBOSS Drop Heads and Dies are ideal for in-place threading from 1/2" - 2" and are designed to fit Wheeler Ratchet Handle 43310 as well as the Ridge Tool Company Models 12R, OO-R, 111-R, O-R, 30A & 31A, 700 Power Drives, Reed Mfg. DHR12 Series Drop Heads and Berkley Tool BT40000 Series Drop Heads. Set Includes: 1 x Metal Carry Case 1 x Ratchet with Handle 1 x 1/2 inch NPT Drop Head with Dies 1 x 3/4 inch NPT Drop Head with Dies 1 x 1 inch NPT Drop Head with Dies 1 x 1 1/4 inch NPT Drop Head with Dies 1 x 1 1/2 inch NPT Drop Head with Dies 1 x 2 inch NPT Drop Head with Dies

    $1.00

  • plumBOSS Water Key 900mm long | WK900

    plumBOSS Water Key 900mm long | WK900

    The Water Key consist of a handle shaft and Horseshoe. The horseshoe saddles over the standard cross head taps.

    $1.00

  • plumBOSS Trim-A-Thread Nipple Cutter Blade | TTNC01B

    plumBOSS Trim-A-Thread Nipple Cutter Blade | TTNC01B

    Nipple Cutter - BLADE Trim-a-Thread Nipple Cutter is a drill attachment used for trimming back excess 1/2 inch brass all-thread combinations. The tool is designed to shave the excess thread to desired length. The Blade also chamfers the inside and outside of all-thread for ease of assembly of the spout.

    $1.00

  • plumBOSS Tucker Pop Riveter | TT55D

    plumBOSS Tucker Pop Riveter | TT55D

    FEATURES The famous Tucker design Ideal for fastening applications in the field Set up to 32mm Nickel/Copper and 4mm steel Mandrel gripping mechanism REPLACEMENT PARTS PO25266 - Fulcrum Pin PO25268 - Fulcrum Pin R Clip PO25286 - Power Unit PO25278 - Set of Two Jaws OTHER REPLACEMENT PARTS ARE AVAILABLE FOR THE TT55D Ideal for on-site or low production use, the tool has the following features and benefits Mandrel gripping mechanism Easy to maintain with full set of spares available

    $1.00

  • plumBOSS Turbo Shear Heavy Duty | TSHD

    plumBOSS Turbo Shear Heavy Duty | TSHD

    HEAVY DUTY TurboShear "HD" even cuts seams one-handed CAPACITIES Heavy-duty jaws and gearing are suitable for cutting 18-GAUGE (1.32 mm) galvanized steel and most other common sheet metals, including 20-gauge (1.02 mm) spiral duct and layered metal seams. ONE-HAND OPERATION Clamping devise is standard with No. TSHD TurboShear Fits most 14.4-volt or larger A/C or cordless drills Cuts straight and to left Capable of navigating tight curved patterns and square cuts Blind cuts require a 1" (25.4 mm) starting hole Heavy-duty jaws and gearing are suitable for cutting 18-gauge (1.32 mm) galvanized steel and most other sheet metals Larger, wider-opening jaws also cut through layered metal seams including the ribs of 20-gauge (1.02 mm) spiral duct The TurboShearHD also makes angled crosscuts through profiles of metal building panels and stone coated metal shingles Reposition the TurboShearHD upside down as necessary for greater maneuverability Replacement Blade TSHDRB CAPACITIES Material Spiral Duct 20-Gauge Galvanized Steel 18-Gauge Mild Steel 16-Gauge Inches .040 (1.02) .052 (1.32) .060 (1.52)

    $1.00

  • plumBOSS 5 Pce Set 16,19,22,25,32mm | TS4C-SET5

    plumBOSS 5 Pce Set 16,19,22,25,32mm | TS4C-SET5

    Product Features 4 cutter auger bit with screw tip for effortless feed and spurs for cleaner faster cutting Screw tip for effortless feed Cutting spur for smoother clean holes Design for faster chip ejection 4x faster than standard spade bits

    $1.00

  • plumBOSS 3 Pce Set 16,19,25mm | TS4C-SET3

    plumBOSS 3 Pce Set 16,19,25mm | TS4C-SET3

    Product Features 4 cutter auger bit with screw tip for effortless feed and spurs for cleaner faster cutting Screw tip for effortless feed Cutting spur for smoother clean holes Design for faster chip ejection 4x faster than standard spade bits

    $1.00

  • plumBOSS Cutter Auger Bit With Screw Tip 32mm | TS4C-32

    plumBOSS Cutter Auger Bit With Screw Tip 32mm | TS4C-32

    Product Features 4 cutter auger bit with screw tip for effortless feed and spurs for cleaner faster cutting Screw tip for effortless feed Cutting spur for smoother clean holes Design for faster chip ejection 4x faster than standard spade bits

    $1.00

  • plumBOSS Cutter Auger Bit With Screw Tip 25mm | TS4C-25

    plumBOSS Cutter Auger Bit With Screw Tip 25mm | TS4C-25

    Product Features 4 cutter auger bit with screw tip for effortless feed and spurs for cleaner faster cutting Screw tip for effortless feed Cutting spur for smoother clean holes Design for faster chip ejection 4x faster than standard spade bits

    $1.00

  • plumBOSS Cutter Auger Bit with Screw Tip 22mm | TS4C-22

    plumBOSS Cutter Auger Bit with Screw Tip 22mm | TS4C-22

    Product Features 4 cutter auger bit with screw tip for effortless feed and spurs for cleaner faster cutting Screw tip for effortless feed Cutting spur for smoother clean holes Design for faster chip ejection 4x faster than standard spade bits

    $1.00

  • plumBOSS Cutter Auger Bit With Screw Tip 19mm | TS4C-19

    plumBOSS Cutter Auger Bit With Screw Tip 19mm | TS4C-19

    Product Features 4 cutter auger bit with screw tip for effortless feed and spurs for cleaner faster cutting Screw tip for effortless feed Cutting spur for smoother clean holes Design for faster chip ejection 4x faster than standard spade bits

    $1.00

  • plumBOSS Cutter Auger Bit With Screw Tip 16mm | TS4C-16

    plumBOSS Cutter Auger Bit With Screw Tip 16mm | TS4C-16

    Product Features 4 cutter auger bit with screw tip for effortless feed and spurs for cleaner faster cutting Screw tip for effortless feed Cutting spur for smoother clean holes Design for faster chip ejection 4x faster than standard spade bits

    $1.00

  • plumBOSS Tap Reseater 1/2  Tapered | TRT2

    plumBOSS Tap Reseater 1/2 Tapered | TRT2

    SWIFT SEATER - DRILL ATTACHMENT PRECISION These unique Swift Seaters have a precision ground stainless steel shaft fitting perfectly into a phosphorous bronze body. No lateral movement prevents out of square seating. CLUTCH When using the Swift Seater in 1/2" taps the bronze body is started in the tap body about half a turn. The shaft (connected to a drill) is withdrawn until the rubber cone on the shaft contacts with the Swift Seater body and screws it in. This also works in reverse, to remove the Swift Seater. This ensures ease of operation for regular checking of the seat, so excessive machining does not shorten the life of the tap body. Drill not included.

    $1.00

  • plumBOSS Telstra Pit Key | TPK01

    plumBOSS Telstra Pit Key | TPK01

    For lifting the lids off Telstra pits

    $1.00

  • plumBOSS Ultimax Tape Measure 8mx25mm Metric | TMX8025

    plumBOSS Ultimax Tape Measure 8mx25mm Metric | TMX8025

    Professional Tape Measure 8m x 25mm Sterling Professional Tape Measure Description: 4 rivet end hook for extra strength on 8m & 10m tapes Double nylon coated matte finish blade for abrasion resistance Rubber sides and grip for comfortable use Extra thick bade material for superior life Fully graduated millimetre markings on 8m and 10m to limit 100mm syndrome Thickened true zero end hook to maintain accuracy

    $1.00

  • plumBOSS Telescopic Mirror and Magnet Set | TM440

    plumBOSS Telescopic Mirror and Magnet Set | TM440

    Features and Benefits Telescopic Handles Extend TO 43cm 50mm Mirror Convenient Pen Size for compact storage Ideal for hard to reach places

    $1.00


You have seen 24 out of 818 products

© 2024 plumBOSS, Australasia

    Login

    Forgot your password?

    Don't have an account yet?
    Create account