Pipe Working Tools
plumBOSS Drill Inner/Outer Chamfering Tool 25-75mm | CHAMF75
Works on different plastic pipes and tubes such as UPVC, PVC, PP, PE, CPVC,ABS etc. Working range: 25 - 75 mm. Works best with standard electric/cordless drills - 14V and up. For best performance run the drill at a low RPM.
$1.00
12" PE Poly Pipe Peeler - PEPEEL12 | RD04632
Features One tool covers a range of PE pipe from 6”-12" nominal IPS (168-324 mm actual O.D.). Creates a uniformly peeled surface. Works well even on out-of-round pipe. Requires 6 1/2" turning clearance around pipe.
$1.00
PE Poly Pipe Peeler/Scraper 7" - PEPEEL6 | RD04631
Features One tool covers a range of PE pipe from 1 1/2”- 7” nominal IPS (48-180 mm actual O.D.). Creates a uniformly peeled surface. Works well even on out-of-round pipe. Requires 5 1/2" turning clearance around pipe.
$1.00
Cordless Portable Pipe Beveller Head Bosch - CPBBADP | RD04646
Bevel Boss Cordless Plastic Pipe Beveller Attachment - CPBBADP An attachment designed for use with a Bosch cordless die grinder to quickly and safely bevel plastic pipe. Adjustable guide plate eliminates guesswork and allows for a consistent bevel length. Swivel guard protects operator from swarf and allows easy rotation around pipe. Long-lasting carbide router bits with four flutes for smooth finish. Eliminates exposure to cutting or grinding disks. 12 or 15 degree router bits are available and must be purchased separately. Router bits sold separately. Pairing router bits: RBIT1 (RD44644) - 15º Router Bit RBIT2 (RD44648) - 12º Router Bit
$1.00
Cordless Portable Pipe Beveller Head DeWalt - CPBDADP | RD04648
Bevel Boss Cordless Plastic Pipe Beveller Attachment - CPBDADP An attachment designed for use with a DeWalt cordless die grinder to quickly and safely bevel plastic pipe. Adjustable guide plate eliminates guesswork and allows for a consistent bevel length. Swivel guard protects operator from swarf and allows easy rotation around pipe. Long-lasting carbide router bits with four flutes for smooth finish. Eliminates exposure to cutting or grinding disks. 12 or 15 degree router bits are available and must be purchased separately. Router bits sold separately. Pairing router bits: RBIT1 (RD44644) - 15º Router Bit RBIT2 (RD44648) - 12º Router Bit
$1.00
Carbide Bevelling Bit 1in 12deg - RBIT2 | RD44648
Cuts a 12 degree bevel onto plastic pipe. Long lasting carbide router bit with 4 flute design cuts smooth, clean cuts. 1/4 inch shaft. With a longer bevel length (25mm) than the 15 degree bit, it is recommended for use on large diameter pipes. Features Because of the bevel length, RBIT2 router bit is recommended for use with 6" diameter and larger, gasketed plastic pipe. Bit creates 12° external bevel, adjustable up to 1" long on plastic pipe. Bit has a 1/4 inch shaft to fit die grinders. Long-lasting carbide router bit with four flutes and high RPMs for fast, smooth cuts. Ideal for large diameter plastic pipe.
$1.00
Carbide Bevelling Bit 5/8 15deg - RBIT1 | RD44644
Cuts a 15 degree bevel onto plastic pipe. Long lasting carbide router bit with 4 flute design cuts smooth, clean cuts. 1/4 inch shaft. Features Carbide router bit with 4 flute design cuts smooth, clean cuts. Cuts a 15 degree bevel onto plastic pipe. Bit has a 1/4 inch shaft to fit die grinders. One of many uses is for 6" - 8" plastic pipe.
$1.00
plumBOSS Water Key 900mm long | WK900
The Water Key consist of a handle shaft and Horseshoe. The horseshoe saddles over the standard cross head taps.
$1.00
plumBOSS Telstra Pit Key | TPK01
For lifting the lids off Telstra pits
$1.00
$1.00
$1.00
FT Heavy Duty Shell Cutter 1 3/4 in- FTSC1750 | RD99138
Shell cutters cut up to 2" deep and fit most standard arbors. These shell cutters are recommended for cast and ductile iron, in use with Feed Tap machines. The attachment thread is 1/2 - 20. Each shell cutter tooth has carbide inserts which long outlast bi-metal teeth. CODE SHELL SIZE (inches) WEIGHT lbs kg FTSC688 11/16 0.09 0.04 FTSC875 7/8 0.15 0.07 FTSC1438 1 7/16 0.41 0.19 FTSC1750 1 3/4 0.57 0.26
$1.00
FT Heavy Duty Shell Cutter 1 7/16in - FTSC1438 | RD99137
Shell cutters cut up to 2" deep and fit most standard arbors. These shell cutters are recommended for cast and ductile iron, in use with Feed Tap machines. The attachment thread is 1/2 - 20. Each shell cutter tooth has carbide inserts which long outlast bi-metal teeth. CODE SHELL SIZE (inches) WEIGHT lbs kg FTSC688 11/16 0.09 0.04 FTSC875 7/8 0.15 0.07 FTSC1438 1 7/16 0.41 0.19 FTSC1750 1 3/4 0.57 0.26
$1.00
FT Heavy Duty Shell Cutter 7/8 in - FTSC875 | RD99134
Shell cutters cut up to 2" deep and fit most standard arbors. These shell cutters are recommended for cast and ductile iron, in use with Feed Tap machines. The attachment thread is 1/2 - 20. Each shell cutter tooth has carbide inserts which long outlast bi-metal teeth. CODE SHELL SIZE (inches) WEIGHT lbs kg FTSC688 11/16 0.09 0.04 FTSC875 7/8 0.15 0.07 FTSC1438 1 7/16 0.41 0.19 FTSC1750 1 3/4 0.57 0.26
$1.00
FT Heavy Duty Shell Cutter 11/16 in - FTSC688 | RD99132
Shell cutters cut up to 2" deep and fit most standard arbors. These shell cutters are recommended for cast and ductile iron, in use with Feed Tap machines. The attachment thread is 1/2 - 20. Each shell cutter tooth has carbide inserts which long outlast bi-metal teeth. CODE SHELL SIZE (inches) WEIGHT lbs kg FTSC688 11/16 0.09 0.04 FTSC875 7/8 0.15 0.07 FTSC1438 1 7/16 0.41 0.19 FTSC1750 1 3/4 0.57 0.26
$1.00
plumBOSS 1/4 Reed Pilot Drill Bit Carbide Tipped - CRPD25 | RD99129
Coupon-retaining drill bit that is carbide-tipped for strength. Built-in wire on drill bit tip grabs the coupon to pull it out of the hole. Take the frustration out of coupon retention by using this specially-designed drill bit.
$1.00
BT1 Blade Cutting F/BT1 & BT2 - BT1B | RD94388
Replacement blade for BT1 Beveller.
$1.00
Feed Tap Base Machine - FTB | RD09160
The feed tap machine is a great waterworks tool that drills through PVC, PE, cast iron and ductile iron pipe while under pressure using a ball valve or ferrule inserted into a tapping saddle. The compact design, featuring a separate, independent feed control for advancing the heavy-duty shell cutter into the pipe, allows the user to easily complete the tap using a drill (not included) for cast and ductile iron, or manual power (7/16” wrench) for PVC/PE and other plastic pipe. The FTB Feed Tap consists of the base unit which allows the user to purchase shell cutters and adapters as required. Kit Includes: 1 x FTB Base Machine 1 x Carry Case 1 x Ratchet Wrench 1 x Pliers 1 x Adjustable Wrench 1 x Allan Key 1 x 1/4" Pilot Drill 1 x 1/4" Coupon Retaining Drill Bit 1 x Bottle Tapping Compound 1 x Set of 3/8" Magnetic Coupon Retainer Set 1 x Set of 1/4" Magnetic Coupon Retainer Set
$1.00
$1.00
Mechanical Hot Tapping Machine 3/4-4 in BSPT - DM3MECHBSPT | RD08354
Features Hot tap tool for piping, fittings and valves with BSPT threads. Hot tap steel, copper, brass or aluminum pipe for installing branch connections from 3/4” to 4” valves. Complete kit includes main body assembly, shafts, hole saw assortment, arbor and accessories in a storage case. Mechanical Hot Tapping Machine is the tapping machine only with valves, saddles, fittings and piping supplied by the operator. Kit Includes: 1 x 93514 - 24in Shaft Complete 1 x 93501 - Gland Nut 1 x 93502 – Brass Ring 1 x 43511 - 3/16in Graphite 1 x 93503 – Main Body 1 x 93515 - 18in Shaft 1 x 43508 – Arbor 1 x 93506 - Coupon Retainer (6) 1 x 43507 – Drill Bit 1 x 40286 - 1/8in Allen Wrench 1 x 40149 - 5/32in Allen Wrench 1 x 43500 - 5/8in Hole Saw 1 x 43501 - 7/8in Hole Saw 1 x 43502 - 1-1/8in Hole Saw 1 x 43503 - 1-3/8in Hole Saw 1 x 43504 - 1-3/4in Hole Saw 1 x 43505 - 2-1/4in Hole Saw 1 x 43506 - 3 1/4in Hole Saw 1 x 93526 - Tool Box 1 x 43510 - Body Protector 2 x 33524 - 1 3/16 Set Screw 1 x 43513 - O - Ring 1 x 30018 - 1/4 Set Screw 1 x 93527 - Main Assembly 1 x Instruction Manual
$1.00
PJ414 - Multi Purpose Pipe Joiner 4-14 inch | RD08080
Multi Purpose Pipe Joiner 4"-14" (102mm-355mm) PJ414 Multi–Purpose Pipe Joiner allows a basic lever–and–chain approach to joining medium and large gasketed pipe and fittings up to 14" size. It works for PVC, ductile iron, clay tile, cast iron soil pipe and concrete pipe. Use two PJ414’s for heavier pipe. Quarter–inch proof coil chain is rated at 1600 lbs (727 kg). PJ414 pipe joiner comes complete with two 12’ (3.7 m) lengths of chain, two grab hooks, plus a two–piece extendable handle of over 4 feet that allows for a variety of applications.
$1.00
Pipe Descaler 3-36 inch - DS36 | RD08006
Wide, tough, flexible scraper that wraps around the pipe to remove scale, dirt, and corrosion quickly from the surface and allow more effective cutting, joining, gasket/valve seating or other operations. Pipe descalers are faster and more effective than chisels, chains or files and need only 2" of clearance around the pipe. Use pipe descalers to clean pipe before cutting, hot tapping or drilling. Roller handles allow smooth movement in use. Made entirely of zinc-plated steel for corrosion resistance and toughness. The scrapers are welded on for long life and can be sharpened. Catalog No. Item Code Type Pipe Capacity Length Weight Inches - Nominal mm in mm lbs kg DS12 08000 Steel 3 -12 70 - 300 32 810 5.7 2.6 DS36 08006 Steel 3 - 36 70 - 910 44 1110 8.2 3.7
$1.00
Pipe Descaler 3-12 inch - DS12 | RD08000
Wide, tough, flexible scraper that wraps around the pipe to remove scale, dirt, and corrosion quickly from the surface and allow more effective cutting, joining, gasket/valve seating or other operations. Pipe descalers are faster and more effective than chisels, chains or files and need only 2" of clearance around the pipe. Use pipe descalers to clean pipe before cutting, hot tapping or drilling. Roller handles allow smooth movement in use. Made entirely of zinc-plated steel for corrosion resistance and toughness. The scrapers are welded on for long life and can be sharpened. Catalog No. Item Code Type Pipe Capacity Length Weight Inches - Nominal mm in mm lbs kg DS12 08000 Steel 3 -12 70 - 300 32 810 5.7 2.6 DS36 08006 Steel 3 - 36 70 - 910 44 1110 8.2 3.7
$1.00
PE Squeeze Off Tool - PES8MMETRIC | RD04708
Features Aluminum parts reduce tool weight for easier handling. Heavy-duty construction for use on metric pipe. Positive stops prevent damage caused by over-clamping. Multiple size/SDR stops on one pair of stops allow using one Reed tool for quick, convenient over-squeezing protection on a variety (see Pipe/SDR Stops above) of sizes. Sliding bar handles make work in tight places easier and increase leverage for tightening. Machined aluminum squeeze bars are anodized or painted to withstand varied climate and soil conditions. Fine-pitched thread permits a controlled, low-effort squeeze. Easy to use in line because of swing bar and no loose parts. Includes an optional-use strap for lifting. Reed offers a wide variety of stops for all Reed PE Squeeze-Off tools.
$1.00
You have seen 24 out of 82 products
