Products

Plumboss Magna Grip Tape Measure 8m x 27mm | PMG8027

Features & Benefits Strong 27mm wide blade 2.6m blade standout 4 rivet strong magnetic end hook with non-marking rubber cover - grips or attaches with ease Extra tough chrome case with rubber grip High wear resistant nylon coated blade

Read more less

$0.01

Plumboss Magnetic Level 600mm (24inch) Aluminium | 600-24

Aluminium Box-Section Levels Features Advanced Box-Section frame ensures accuracy Top-read window Bevelled endplates protect vials from shock 1 plumb vial and 1 level vial and 1 45° vial Two milled surfaces Soft-grip rubber handle Anti-shock end caps 60cm/24"

Read more less

$0.01

Plumboss Magnetic Nutsetter 1/4" x 65mm | NS14B065

Plumboss Magnetic Nutsetter 1/4" x 65mm | NS14B065A magnetic nutsetter for driving 1/4" hex-head fasteners. The magnetic socket holds the fastener while positioning it, and the S2 steel construction is suitable for use with impact drivers.Features 1/4" hex socket Magnetic fastener retention S2 steel construction Hex-drive shank Suitable for impact drivers Specifications Socket size: 1/4" Length: 65mm Stock code: NS14B065

Read more less

$0.01

Plumboss Magnetic Nutsetter 3/8" x 65mm | NS38B065

Plumboss Magnetic Nutsetter 3/8" x 65mm | NS38B065A magnetic nutsetter for driving 3/8" hex-head fasteners. The magnetic socket holds the fastener while positioning it, and the S2 steel construction is suitable for use with impact drivers.Features 3/8" hex socket Magnetic fastener retention S2 steel construction Hex-drive shank Suitable for impact drivers Specifications Socket size: 3/8" Length: 65mm Stock code: NS38B065

Read more less

$0.01

Plumboss Magnetic Nutsetter 5/16" x 150mm | NS516B150

Plumboss Magnetic Nutsetter 5/16" x 150mm | NS516B150A 150mm-long magnetic nutsetter for reaching 5/16" hex-head fasteners. The magnetic socket holds the fastener while positioning it, and the S2 steel construction is suitable for use with impact drivers.Features 5/16" hex socket 150mm length for additional reach Magnetic fastener retention S2 steel construction Hex-drive shank Suitable for impact drivers Specifications Socket size: 5/16" Length: 150mm Stock code: NS516B150

Read more less

$0.01

Plumboss Magnetic Nutsetter 5/16" x 65mm | NS516B065

Plumboss Magnetic Nutsetter 5/16" x 65mm | NS516B065A magnetic nutsetter for driving 5/16" hex-head fasteners. The magnetic socket holds the fastener while positioning it, and the S2 steel construction is suitable for use with impact drivers.Features 5/16" hex socket Magnetic fastener retention S2 steel construction Hex-drive shank Suitable for impact drivers Specifications Socket size: 5/16" Length: 65mm Stock code: NS516B065

Read more less

$0.01

Plumboss Manhole Hook 750mm | MH750

Plumboss Manhole Hook 750mm | MH750 Heavy-duty hook for safe manhole cover lifting The Plumboss Manhole Hook is designed for safely lifting and removing manhole covers, drain lids and access covers on site. The 750mm length provides leverage and reach, allowing operators to open covers efficiently while keeping hands clear of pinch points. Manufactured from high-carbon steel, this heavy-duty tool is built to handle stubborn and heavy covers in demanding environments. The perpendicular hook design and rocker head allow easier entry into cover notches, delivering better control and reduced effort during use. Made in the USA, it is a reliable, trade-quality tool built for repeated use. Please note: MH750 is the updated product code and replaces former codes MH30 and RD02302.

Read more less

$0.01

Plumboss Marking Pliers | KKMP

Marking Pliers BRANCHFORMERS DIMPLE - NOTCHING The marking pliers are used to assit in setting how deep your take off tube sits in your run tube, before soldering When the dimples are on the side, the end of the branch tube must be shaped. When the dimples are along the main tube, the end of the branch tube need not be shaped Branch Puller / Branch Pulling Device

Read more less

$0.01

Plumboss Masonry Drill Bit 10x150mm | MAS-10-150

Plumboss Masonry Drill Bit 10mm x 150mm | MAS-10-150For drilling concrete, brick and stone using a hammer drill with a standard 13mm chuck. The tungsten carbide tip cuts the masonry, while the wide helix flute helps clear drilling dust from the hole. The round shank is for a conventional drill chuck, rather than an SDS-Plus fitting.Features Tungsten carbide tip Wide helix flute for dust removal Round shank Suitable for rotary and hammer drilling Specifications Diameter: 10mm Length: 150mm Stock code: MAS-10-150

Read more less

$0.01

Plumboss Masonry Drill Bit 12x150mm | MAS-12-150

Plumboss Masonry Drill Bit 12mm x 150mm | MAS-12-150For drilling concrete, brick and stone using a hammer drill with a standard 13mm chuck. The tungsten carbide tip cuts the masonry, while the wide helix flute helps clear drilling dust from the hole. The round shank is for a conventional drill chuck, rather than an SDS-Plus fitting.Features Tungsten carbide tip Wide helix flute for dust removal Round shank Suitable for rotary and hammer drilling Specifications Diameter: 12mm Length: 150mm Stock code: MAS-12-150

Read more less

$0.01

Plumboss Masonry Drill Bit 4x75mm | MAS-4-75

$0.01

Plumboss Masonry Drill Bit 5.5x150mm | MAS-5.5-150

$0.01

Plumboss Masonry Drill Bit 5x85mm | MAS-5-85

Plumboss Masonry Drill Bit 5mm x 85mm | MAS-5-85For drilling concrete, brick and stone using a hammer drill with a standard 13mm chuck. The tungsten carbide tip cuts the masonry, while the wide helix flute helps clear drilling dust from the hole. The round shank is for a conventional drill chuck, rather than an SDS-Plus fitting.Features Tungsten carbide tip Wide helix flute for dust removal Round shank Suitable for rotary and hammer drilling Specifications Diameter: 5mm Length: 85mm Stock code: MAS-5-85

Read more less

$0.01

Plumboss Masonry Drill Bit 6.5x100mm | MAS-6.5-100

Plumboss Masonry Drill Bit 6.5mm x 100mm | MAS-6.5-100For drilling concrete, brick and stone using a hammer drill with a standard 13mm chuck. The tungsten carbide tip cuts the masonry, while the wide helix flute helps clear drilling dust from the hole. The round shank is for a conventional drill chuck, rather than an SDS-Plus fitting.Features Tungsten carbide tip Wide helix flute for dust removal Round shank Suitable for rotary and hammer drilling Specifications Diameter: 6.5mm Length: 100mm Stock code: MAS-6.5-100

Read more less

$0.01

Plumboss Masonry Drill Bit 6.5x150mm | MAS-6.5-150

Plumboss Masonry Drill Bit 6.5mm x 150mm | MAS-6.5-150For drilling concrete, brick and stone using a hammer drill with a standard 13mm chuck. The tungsten carbide tip cuts the masonry, while the wide helix flute helps clear drilling dust from the hole. The round shank is for a conventional drill chuck, rather than an SDS-Plus fitting.Features Tungsten carbide tip Wide helix flute for dust removal Round shank Suitable for rotary and hammer drilling Specifications Diameter: 6.5mm Length: 150mm Stock code: MAS-6.5-150

Read more less

$0.01

Plumboss Masonry Drill Bit 6x100mm | MAS-6-100

Plumboss Masonry Drill Bit 6mm x 100mm | MAS-6-100For drilling concrete, brick and stone using a hammer drill with a standard 13mm chuck. The tungsten carbide tip cuts the masonry, while the wide helix flute helps clear drilling dust from the hole. The round shank is for a conventional drill chuck, rather than an SDS-Plus fitting.Features Tungsten carbide tip Wide helix flute for dust removal Round shank Suitable for rotary and hammer drilling Specifications Diameter: 6mm Length: 100mm Stock code: MAS-6-100

Read more less

$0.01

Plumboss Masonry Drill Bit 6x150mm | MAS-6-150

Plumboss Masonry Drill Bit 6mm x 150mm | MAS-6-150For drilling concrete, brick and stone using a hammer drill with a standard 13mm chuck. The tungsten carbide tip cuts the masonry, while the wide helix flute helps clear drilling dust from the hole. The round shank is for a conventional drill chuck, rather than an SDS-Plus fitting.Features Tungsten carbide tip Wide helix flute for dust removal Round shank Suitable for rotary and hammer drilling Specifications Diameter: 6mm Length: 150mm Stock code: MAS-6-150

Read more less

$0.01

Plumboss Masonry Drill Bit 7x100mm | MAS-7-100

$0.01

Plumboss Masonry Drill Bit 8x150mm | MAS-8-150

Plumboss Masonry Drill Bit 8mm x 150mm | MAS-8-150For drilling concrete, brick and stone using a hammer drill with a standard 13mm chuck. The tungsten carbide tip cuts the masonry, while the wide helix flute helps clear drilling dust from the hole. The round shank is for a conventional drill chuck, rather than an SDS-Plus fitting.Features Tungsten carbide tip Wide helix flute for dust removal Round shank Suitable for rotary and hammer drilling Specifications Diameter: 8mm Length: 150mm Stock code: MAS-8-150

Read more less

$0.01

Plumboss Masonry Drill Bit5.5x85mm | MAS-5.5-85

Plumboss Masonry Drill Bit 5.5mm x 85mm | MAS-5.5-85For drilling concrete, brick and stone using a hammer drill with a standard 13mm chuck. The tungsten carbide tip cuts the masonry, while the wide helix flute helps clear drilling dust from the hole. The round shank is for a conventional drill chuck, rather than an SDS-Plus fitting.Features Tungsten carbide tip Wide helix flute for dust removal Round shank Suitable for rotary and hammer drilling Specifications Diameter: 5.5mm Length: 85mm Stock code: MAS-5.5-85

Read more less

$0.01

Plumboss Masonry Drill Bit5x150mm | MAS-5-150

$0.01

Plumboss maxxGASS 400g Cylinder (Min. Buy 12) | MG2

Plumboss maxx GASS 400g Gas Cylinder (Min. Buy 12) | MG2 Ideal for medium to heavy soldering and brazing Burns longer and hotter and solders faster than propane gas Italian made

Read more less

$0.01

Plumboss Medium Carpenters Pencil - Box of 72 | PCR01C

Box of 72 plumBOSS Carpenter's pencils A basic must have for anyone in construction

Read more less

$0.01

Plumboss Medium Carpenters Pencil - Individual | PCR01

Features & Benefits Medium Bulk Red Pencil Medium

Read more less

$0.01