Pipe and Tube Benders

20 products


  • Tube Bender 1/2 inch - TB08 | RD02747

    $1.00

  • Tube Bender 3/8 inch - TB06 | RD02746

    $1.00

  • Tube Bender 1/4 inch - TB04 | RD02745

    $1.00

  • Quad Bender 3/16, 1/4, 5/16, 3/8in | QTB01

    Quad Bender 3/16, 1/4, 5/16, 3/8in | QTB01

    QUAD BENDER 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch MULTI-SIZE LEVER BENDER For soft copper, brass, aluminium and steel tubing. For 3/16 inch, 1/4 inch, 5/16 inch & 3/8 inch O.D tubing. Allows up to 180° bends. Calibrated angle markings every 15°, with separate gauge marks for right, left and normal.

    $1.00

  • plumBOSS Bending Spring 1 inch | KKBS25

    plumBOSS Bending Spring 1 inch | KKBS25

    Bending Spring 1 inch SPRING TYPE TUBE BENDERS These spring type tube benders allow hand bending of soft copper and aluminium tubing to any shape without collapsing wall of tubing. KK Bending Springs are designed for easy installing onto tube and easy removal from the tube. The spring is slightly over-sized so it slides easily along the tube. Once the spring is at the desired position turn the two thumb holds to decrease the overall size of the spring. After completing the bend release the thumb holds and the spring will enlarge to allow easy removal.

    $1.00

  • plumBOSS Bending Spring 3/4 inch | KKBS20

    plumBOSS Bending Spring 3/4 inch | KKBS20

    Bending Spring 3/4 inch SPRING TYPE TUBE BENDERS These spring type tube benders allow hand bending of soft copper and aluminium tubing to any shape without collapsing wall of tubing. KK Bending Springs are designed for easy installing onto tube and easy removal from the tube. The spring is slightly over-sized so it slides easily along the tube. Once the spring is at the desired position turn the two thumb holds to decrease the overall size of the spring. After completing the bend release the thumb holds and the spring will enlarge to allow easy removal.

    $1.00

  • plumBOSS Bending Spring 1/2 inch | KKBS15

    plumBOSS Bending Spring 1/2 inch | KKBS15

    Bending Spring 1/2 inch SPRING TYPE TUBE BENDERS These spring type tube benders allow hand bending of soft copper and aluminium tubing to any shape without collapsing wall of tubing. KK Bending Springs are designed for easy installing onto tube and easy removal from the tube. The spring is slightly over-sized so it slides easily along the tube. Once the spring is at the desired position turn the two thumb holds to decrease the overall size of the spring. After completing the bend release the thumb holds and the spring will enlarge to allow easy removal.

    $1.00

  • plumBOSS Tube Bender 5/8 inch | FHA10

    plumBOSS Tube Bender 5/8 inch | FHA10

    TUBE BENDER 5/8 inch LEVER TYPE - ONE PIECE BENDERS For soft copper, aluminium, brass and steel tubing Other size benders for 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch and 3/4 inch available Open side design slips over tube at any point. Makes smooth, short radius bends up to 180° with minimum effort. Leaves no scoring or flattening of tubing. Wide hook grips tubing securely.

    $1.00

  • plumBOSS Tube Bender 3/8 inch | FHA06

    plumBOSS Tube Bender 3/8 inch | FHA06

    TUBE BENDER 3/8 inch LEVER TYPE - ONE PIECE BENDERS For soft copper, aluminium, brass and steel tubing Other size benders for1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch and 3/4 inch available Open side design slips over tube at any point. Makes smooth, short radius bends up to 180° with minimum effort. Leaves no scoring or flattening of tubing. Wide hook grips tubing securely.

    $1.00

  • plumBOSS External Bending Spring 1in (25mm) | BS25EXT

    plumBOSS External Bending Spring 1in (25mm) | BS25EXT

    Bending Spring 1 inch SPRING TYPE TUBE BENDERS These spring type tube benders allow hand bending of soft copper and aluminium tubing to any shape without collapsing wall of tubing. KK Bending Springs are designed for easy installing onto tube and easy removal from the tube. The spring is slightly over-sized so it slides easily along the tube. Once the spring is at the desired position turn the two thumb holds to decrease the overall size of the spring. After completing the bend release the thumb holds and the spring will enlarge to allow easy removal.

    $1.00

  • plumBOSS External Bending Spring 3/4in (20mm) | BS20EXT

    plumBOSS External Bending Spring 3/4in (20mm) | BS20EXT

    Bending Spring 3/4 inch SPRING TYPE TUBE BENDERS These spring type tube benders allow hand bending of soft copper and aluminium tubing to any shape without collapsing wall of tubing. KK Bending Springs are designed for easy installing onto tube and easy removal from the tube. The spring is slightly over-sized so it slides easily along the tube. Once the spring is at the desired position turn the two thumb holds to decrease the overall size of the spring. After completing the bend release the thumb holds and the spring will enlarge to allow easy removal.

    $1.00

  • plumBOSS External Bending Spring 5/8in (18mm) | BS18EXT

    plumBOSS External Bending Spring 5/8in (18mm) | BS18EXT

    Bending Spring 1/2 inch SPRING TYPE TUBE BENDERS These spring type tube benders allow hand bending of soft copper and aluminium tubing to any shape without collapsing wall of tubing. KK Bending Springs are designed for easy installing onto tube and easy removal from the tube. The spring is slightly over-sized so it slides easily along the tube. Once the spring is at the desired position turn the two thumb holds to decrease the overall size of the spring. After completing the bend release the thumb holds and the spring will enlarge to allow easy removal.

    $1.00

  • plumBOSS External Bending Spring 3/8in (10mm) | BS10EXT

    plumBOSS External Bending Spring 3/8in (10mm) | BS10EXT

    Bending Spring 3/8 inch SPRING TYPE TUBE BENDERS These spring type tube benders allow hand bending of soft copper and aluminium tubing to any shape without collapsing wall of tubing. KK Bending Springs are designed for easy installing onto tube and easy removal from the tube. The spring is slightly over-sized so it slides easily along the tube. Once the spring is at the desired position turn the two thumb holds to decrease the overall size of the spring. After completing the bend release the thumb holds and the spring will enlarge to allow easy removal.

    $1.00

  • plumBOSS Nylon Guide - suit 3/4 inch Bender | BALTB34NG

    plumBOSS Nylon Guide - suit 3/4 inch Bender | BALTB34NG

    Nylon Guide - suit 3/4 inch Bender The nylon guide ensures a smooth finish especially when bending chrome plated tubing.

    $1.00

  • plumBOSS Nylon Guide - suit 1/2 inch Bender | BALTB12NG

    plumBOSS Nylon Guide - suit 1/2 inch Bender | BALTB12NG

    Nylon Guide - suit 1/2 inch Bender The nylon guide ensures a smooth finish especially when bending chrome plated tubing.

    $1.00

  • plumBOSS Tube Bender 3/4 inch | FHA12

    plumBOSS Tube Bender 3/4 inch | FHA12

    TUBE BENDER 3/4 inch plumBOSS LEVER TYPE - ONE PIECE BENDERS For soft copper, aluminium, brass and steel tubing Other size benders for 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch and 3/4 inch available Open side design slips over tube at any point. Makes smooth, short radius bends up to 180° with minimum effort. Leaves no scoring or flattening of tubing. Wide hook grips tubing securely.

    $1.00

  • plumBOSS Tube Bender 1/2 inch | FHA08

    plumBOSS Tube Bender 1/2 inch | FHA08

    TUBE BENDER 1/2 inch LEVER TYPE - ONE PIECE BENDERS For soft copper, aluminium, brass and steel tubing Other size benders for 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch; and 3/4 inch available Open side design slips over tube at any point. Makes smooth, short radius bends up to 180° with minimum effort. Leaves no scoring or flattening of tubing. Wide hook grips tubing securely.

    $1.00

  • plumBOSS External Bending Spring 1/2in (15mm) | BS15EXT

    plumBOSS External Bending Spring 1/2in (15mm) | BS15EXT

    Bending Spring 1/2 inch SPRING TYPE TUBE BENDERS These spring type tube benders allow hand bending of soft copper and aluminium tubing to any shape without collapsing wall of tubing. KK Bending Springs are designed for easy installing onto tube and easy removal from the tube. The spring is slightly over-sized so it slides easily along the tube. Once the spring is at the desired position turn the two thumb holds to decrease the overall size of the spring. After completing the bend release the thumb holds and the spring will enlarge to allow easy removal.

    $1.00

  • plumBOSS Tube Bender 2 piece 3/4 inch | BALTB34

    plumBOSS Tube Bender 2 piece 3/4 inch | BALTB34

    TUBE BENDER TWO PIECE 3/4 inch plumBOSS LEVER TYPE - TWO PIECE BENDERS For soft or hard copper, aluminium and chrome plated tubing. 90°and 45° bends can be formed by bending firmly to respective indicators on forming head An extremely strong alloy to B.S.D.T 5008 is used on the bender head and fork to ensure long life and light weight. Knurled handles assist grip, making bender easier to control. The two handles readily separate for quick loading and also allow for working in confined spaces. The nylon guide ensures a smooth finish especially when bending chrome plated tubing.

    $1.00

  • plumBOSS Tube Bender 2 piece 1/2 inch | BALTB12

    plumBOSS Tube Bender 2 piece 1/2 inch | BALTB12

    TUBE BENDER TWO PIECE 1/2 inch plumBOSS LEVER TYPE - TWO PIECE BENDERS For soft or hard copper, aluminium and chrome plated tubing. 90° and 45° bends can be formed by bending firmly to respective indicators on forming head An extremely strong alloy to B.S.D.T 5008 is used on the bender head and fork to ensure long life and light weight. Knurled handles assist grip, making bender easier to control. The two handles readily separate for quick loading and also allow for working in confined spaces. The nylon guide ensures a smooth finish especially when bending chrome plated tubing.

    $1.00

© 2024 plumBOSS, Australasia

    Login

    Forgot your password?

    Don't have an account yet?
    Create account