Manual Pipe and Tube Cutters
-
Plumboss Swift Slice 1/2 inch | KPS12
Swift Slice 1/2 inch Fast, one-handed cutting for copper tube The Plumboss Swift Slice is the fastest way to cut 1/2" copper tubing, designed for speed, simplicity and ease of use on site. The integrated self-adjusting mechanism eliminates the need to manually tighten or adjust the cutting wheel—simply position the tool and twist to achieve a clean cut in seconds. Built for efficiency, the compact design allows for one-handed operation, making it ideal for working in tight spaces where traditional tube cutters are difficult to use. With minimal effort required, it delivers consistent, clean cuts every time, helping speed up installation and reduce fatigue during repetitive tasks.
$0.01
-
Plumboss Mini Cutter 1/8 -5/8 inch (4mm-15mm) | 127
Mini Cutter 1/8"-5/8" (4mm-15mm) MINI CUTTERS For use in extremely tight places, these tube cutters require minimal swing around the tubing.
$0.01
-
Plumboss Chain Pipe Cutter 114mm | PB-CC114
Chain Pipe Cutter 114mm Powerful cutting for hard-to-reach pipework The Plumboss Chain Pipe Cutter is designed for cutting pipe in confined or hard-to-reach areas where traditional cutters cannot be used. The chain wraps around the pipe, allowing controlled cutting action with a ratcheting mechanism that delivers clean, even cuts across a wide range of materials. Built for trade use, this cutter is equipped with multiple alloy steel cutting wheels that distribute cutting force evenly around the pipe. The locking mechanism prevents lateral movement during operation, while the butterfly screw allows smooth and controlled feeding as the cut progresses. Suitable for plumbing, heating and maintenance work across a variety of pipe types.
$0.01
-
Internal Pipe Cutter 1 1/4 In Min - 10cm long | IC1S
Internal Pipe Cutter 1 1/4 In Min Compact internal cutting for tight access work The Plumboss Internal Pipe Cutter IC1S is designed for cutting pipe from the inside, making it ideal for tight access applications such as below floor level, inside walls, or within confined spaces. Its compact 10cm shaft allows precise cutting where traditional external cutters cannot reach. Fitted with a heat-treated saw tooth blade, the cutter delivers fast, aggressive cutting performance on plastic pipe, including PVC and ABS, as well as timber for applications such as sink lugs. Designed to be used with a standard drill, it provides a simple and efficient solution for plumbing and maintenance work. Code Description IC1A Internal Pipe Cutter 1 1/2" Minimum I.D Abrasive - 10cm Long IC1S Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 10cm Long IC1SL Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 18cm Long IC1RA Replacement Abrasive Blade IC1RD Replacement Diamond Blade IC1RS Replacement Saw Blade
$0.01
-
Internal Pipe Cutter Saw & Abrasive blade 18cm | IC1SL
The Plumboss Internal Pipe Cutter is designed for cutting pipe from the inside, making it ideal for situations where external access is limited. Perfect for trimming pipe below floor level, inside walls or in confined spaces, it allows clean, controlled cuts without the need for full pipe access. Equipped with a heat-treated steel saw tooth blade, the tool delivers fast and efficient cutting performance. An abrasive blade option is also included for applications where the cutter may come into contact with concrete or other hard materials, helping maintain performance and blade life in tougher conditions. Code Description IC1A Internal Pipe Cutter 1 1/2" Minimum I.D Abrasive - 10cm Long IC1S Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 10cm Long IC1SL Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 18cm Long IC1RA Replacement Abrasive Blade IC1RD Replacement Diamond Blade IC1RS Replacement Saw Blade
$0.01
-
PVC Pipe Cutter 1 7/8-4 1/2in (48-114mm) - RD04144 | RDTC4QPVC
Quick Release„¢ is a REED invention and still the industry standard for tubing cutters. Features include quick release, quick advance, and manual advance, along with the ball detent wheel pin. Quick release trigger on sliding bar zips open for quick cutter removal. With a simple wheel change, Quick Release„¢ cutters can be used for a variety of plastic pipe including PVC, CPVC, PE, PP and ABS. Cutter design yields best tracking and smooth operation.
$0.01
-
Plumboss IC1 Abrasive Blade | IC1RA
IC1 Abrasive Blade Reliable cutting in abrasive and hard contact conditions The Plumboss IC1 Abrasive Blade is a replacement blade designed for use with IC1 internal pipe cutters, providing reliable performance in demanding environments. It is specifically suited for applications where the blade may come into contact with concrete, brick or other hard materials that would quickly damage standard saw tooth blades. Manufactured using abrasive materials reinforced for durability, this blade maintains cutting performance when working in harsh conditions. It is ideal for plumbing and maintenance work where pipes need to be cut from the inside in environments such as slabs, walls or areas with surrounding concrete. Code Description IC1A Internal Pipe Cutter 1 1/2" Minimum I.D Abrasive - 10cm Long IC1S Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 10cm Long IC1SL Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 18cm Long IC1RA Replacement Abrasive Blade IC1RD Replacement Diamond Blade IC1RS Replacement Saw Blade
$0.01
-
Plumboss IC1 Diamond Blade | IC1RD
IC1 Diamond Blade Durable diamond blade for tough cutting conditions The Plumboss IC1 Diamond Blade is a replacement blade designed for internal pipe cutters, delivering reliable cutting performance in demanding applications. Engineered for situations where the blade may come into contact with concrete, brick or other hard materials, it provides improved durability compared to standard blades. Ideal for plumbing and maintenance work, this blade is suited to cutting pipe from the inside where conditions are harsh or abrasive. It helps maintain cutting performance while reducing wear when working in environments where traditional blades would deteriorate quickly. Code Description IC1A Internal Pipe Cutter 1 1/2" Minimum I.D Abrasive - 10cm Long IC1S Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 10cm Long IC1SL Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 18cm Long IC1RA Replacement Abrasive Blade IC1RD Replacement Diamond Blade IC1RS Replacement Saw Blade
$0.01
-
IC1 Saw Tooth Blade | IC1RS
IC1 Saw Tooth Blade Fast cutting replacement blade for internal pipe cutters The Plumboss IC1 Saw Tooth Blade is a replacement blade designed for use with internal pipe cutters, delivering fast and aggressive cutting performance on plastic pipe. Engineered from heat-treated steel, the saw tooth profile allows efficient cutting of materials such as PVC, ABS and similar plastics, ensuring clean results when cutting from the inside of the pipe. Designed to suit IC1 series internal pipe cutters, this blade restores cutting performance and extends tool life. It is ideal for plumbing and maintenance applications where pipes need to be trimmed below floor level or in confined spaces where external access is limited. Code Description IC1A Internal Pipe Cutter 1 1/2" Minimum I.D Abrasive - 10cm Long IC1S Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 10cm Long IC1SL Internal Pipe Cutter 1 1/4" Minimum I.D Saw - 18cm Long IC1RA Replacement Abrasive Blade IC1RD Replacement Diamond Blade IC1RS Replacement Saw Blade
$0.01
-
Plumboss Swift Slice 3/4 inch | KPS34
Swift Slice 3/4 inch Fast, one-handed cutting for copper tube The Plumboss Swift Slice is the fastest way to cut 3/4" copper tubing, designed for speed and simplicity on site. The integrated self-adjusting mechanism removes the need to manually tighten the cutting wheel - simply position the tool and twist a few times to complete the cut. Built for efficiency, the compact design allows easy one-handed operation, making it ideal for tight spaces where traditional cutters are difficult to use. It delivers clean, consistent cuts with minimal effort, helping improve productivity across repetitive plumbing tasks.
$0.01
-
Swift Slice Copper Tube Cutter Wheel – Replacement (ea) | KPSW
Swift Slice Copper Tube Cutter Wheel – Replacement (ea) Restore cutting performance for clean, smooth copper tube cuts The Swift Slice Copper Tube Cutter Wheel is a replacement cutting wheel designed to restore the performance of your Swift Slice tube cutter. Ideal for worn or dulled wheels, it ensures your tool continues to deliver clean, smooth and efficient cuts on copper pipe. Designed to suit all Plumboss Swift Slice tools, this replacement wheel is a simple and cost-effective way to keep your cutter performing like new. Built for consistent cutting performance, it helps maintain efficiency on-site and reduces the need for full tool replacement.
$0.01
-
Plumboss Roller Bearing Tube Cutter 12–67mm Copper | RBCCU12-67
Plumboss Roller Bearing Tube Cutter 12–67mm Copper Smooth, precise tube cutting with roller bearings The Plumboss Roller Bearing Tube Cutter for copper tube is designed to deliver smooth, accurate cuts with minimal effort. The roller bearing support system keeps the tube aligned while cutting, helping produce clean square cuts during plumbing and installation work. Built for durability and reliability on site, this cutter provides controlled cutting performance across a wide range of copper tube sizes. The compact design allows easy use in confined spaces commonly encountered during plumbing and service installations.
$0.01
-
Plumboss Roller Bearing Tube Cutter 4–28mm Copper | RBCCU4-28
Plumboss Roller Bearing Tube Cutter 4–28mm Copper Smooth, precise tube cutting with roller bearings The Plumboss Roller Bearing Tube Cutter for copper tube is designed to deliver smooth, accurate cuts with minimal effort. The roller bearing support system keeps the tube aligned while cutting, helping produce clean square cuts during plumbing and installation work. Built for durability and reliability on site, this cutter provides controlled cutting performance across a wide range of copper tube sizes. The compact design allows easy use in confined spaces commonly encountered during plumbing and service installations.
$0.01
-
Plumboss Roller Bearing Tube Cutter 5–34mm Copper | RBCCU5-34
Plumboss Roller Bearing Tube Cutter 5–34mm Copper Smooth, precise tube cutting with roller bearings The Plumboss Roller Bearing Tube Cutter for copper tube is designed to deliver smooth, accurate cuts with minimal effort. The roller bearing support system keeps the tube aligned while cutting, helping produce clean square cuts during plumbing and installation work. Built for durability and reliability on site, this cutter provides controlled cutting performance across a wide range of copper tube sizes. The compact design allows easy use in confined spaces commonly encountered during plumbing and service installations.
$0.01
-
Plumboss Roller Bearing Tube Cutter 6–42mm Copper | RBCCU6-42
Plumboss Roller Bearing Tube Cutter 6–42mm Copper Smooth, precise tube cutting with roller bearings The Plumboss Roller Bearing Tube Cutter for copper tube is designed to deliver smooth, accurate cuts with minimal effort. The roller bearing support system keeps the tube aligned while cutting, helping produce clean square cuts during plumbing and installation work. Built for durability and reliability on site, this cutter provides controlled cutting performance across a wide range of copper tube sizes. The compact design allows easy use in confined spaces commonly encountered during plumbing and service installations.
$0.01
-
Plumboss Roller Bearing Tube Cutter 12–67mm Stainless Steel | RBCSS12-67
Plumboss Roller Bearing Tube Cutter 12–67mm Stainless Steel Smooth, precise tube cutting with roller bearings The Plumboss Roller Bearing Tube Cutter for stainless steel tube is engineered to handle harder materials while maintaining smooth and accurate cutting performance. The roller bearing support system stabilises the tube during cutting to deliver clean and precise results. Designed for durability in demanding applications, this cutter is ideal for stainless steel tube installations where strength, precision and reliability are required on site.
$0.01
-
Plumboss Roller Bearing Tube Cutter 4–28mm Stainless Steel | RBCSS4-28
Plumboss Roller Bearing Tube Cutter 4–28mm Stainless Steel Smooth, precise tube cutting with roller bearings The Plumboss Roller Bearing Tube Cutter for stainless steel tube is engineered to handle harder materials while maintaining smooth and accurate cutting performance. The roller bearing support system stabilises the tube during cutting to deliver clean and precise results. Designed for durability in demanding applications, this cutter is ideal for stainless steel tube installations where strength, precision and reliability are required on site.
$0.01
-
Plumboss Roller Bearing Tube Cutter 5–34mm Stainless Steel | RBCSS5-34
Plumboss Roller Bearing Tube Cutter 5–34mm Stainless Steel Smooth, precise tube cutting with roller bearings The Plumboss Roller Bearing Tube Cutter for stainless steel tube is engineered to handle harder materials while maintaining smooth and accurate cutting performance. The roller bearing support system stabilises the tube during cutting to deliver clean and precise results. Designed for durability in demanding applications, this cutter is ideal for stainless steel tube installations where strength, precision and reliability are required on site.
$0.01
-
Plumboss Roller Bearing Tube Cutter 6–42mm Stainless Steel | RBCSS6-42
Plumboss Roller Bearing Tube Cutter 6–42mm Stainless Steel Smooth, precise tube cutting with roller bearings The Plumboss Roller Bearing Tube Cutter for stainless steel tube is engineered to handle harder materials while maintaining smooth and accurate cutting performance. The roller bearing support system stabilises the tube during cutting to deliver clean and precise results. Designed for durability in demanding applications, this cutter is ideal for stainless steel tube installations where strength, precision and reliability are required on site.
$0.01
-
Hinged Cutter 1–2 1/2 inch for Stainless Steel | RD03110
Hinged pipe cutter for stainless steel Hinged pipe cutter designed for stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications. Hinged cutters in this range: Pipe Capacity Cast Iron / Ductile Iron Copper Steel / Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2" (32 – 76 mm) - - RD03110 - 2" – 4" (60 – 125 mm) RD03122 - RD03120 - 4" – 6" (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8" (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12" (219 – 356 mm) RD03152 - RD03150 RD03154
$0.01
-
Hinged Cutter 2–4 inch for Steel and Stainless Steel - H4S | RD03120
Hinged pipe cutter for steel and stainless steel Hinged pipe cutter designed for steel and stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications. Hinged cutters in this range: Pipe Capacity Cast Iron / Ductile Iron Copper Steel / Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2" (32 – 76 mm) - - RD03110 - 2" – 4" (60 – 125 mm) RD03122 - RD03120 - 4" – 6" (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8" (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12" (219 – 356 mm) RD03152 - RD03150 RD03154
$0.01
-
Hinged Cutter 4–6 inch for Steel and Stainless Steel - H6S | RD03130
Hinged pipe cutter for steel and stainless steel Hinged pipe cutter designed for steel and stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications. Hinged cutters in this range: Pipe Capacity Cast Iron / Ductile Iron Copper Steel / Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2" (32 – 76 mm) - - RD03110 - 2" – 4" (60 – 125 mm) RD03122 - RD03120 - 4" – 6" (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8" (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12" (219 – 356 mm) RD03152 - RD03150 RD03154
$0.01
-
Hinged Cutter 6–8 inch for Steel and Stainless Steel - H8S | RD03140
Hinged pipe cutter for steel and stainless steel Hinged pipe cutter designed for steel and stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications. Hinged cutters in this range: Pipe Capacity Cast Iron / Ductile Iron Copper Steel / Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2" (32 – 76 mm) - - RD03110 - 2" – 4" (60 – 125 mm) RD03122 - RD03120 - 4" – 6" (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8" (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12" (219 – 356 mm) RD03152 - RD03150 RD03154
$0.01
-
Hinged Cutter 8–12 inch for Steel and Stainless Steel - H12S | RD03150
Hinged pipe cutter for steel and stainless steel Hinged pipe cutter designed for steel and stainless steel pipe. The hinged design allows the cutter to wrap around the pipe, making it suitable for use in confined spaces where full rotation is not possible. Lighter than most manual pipe cutters, these hinged cutters track better for square cuts and require less clearance, while providing improved torque so cuts are made faster and with less effort. The cutter applies even pressure around the pipe circumference to achieve a clean cut. The hinged construction allows quick installation onto the pipe and efficient operation in trench or in-place applications. Hinged cutters in this range: Pipe Capacity Cast Iron / Ductile Iron Copper Steel / Stainless Steel Heavy Wall / Stainless Steel 1" – 2 1/2" (32 – 76 mm) - - RD03110 - 2" – 4" (60 – 125 mm) RD03122 - RD03120 - 4" – 6" (114 – 182 mm) RD03132 RD03130 RD03130 - 6" – 8" (168 – 240 mm) RD03142 RD03140 RD03140 - 8" – 12" (219 – 356 mm) RD03152 - RD03150 RD03154
$0.01
You have seen 24 out of 98 products
