Pipe and Tube Cutting
-
$0.01
-
Cutter Wheel Steel - HS4 | RD03504
Blade Exposure: 0.320 inch 8.1mm Application: Steel, Stainless Steel Fits Cutters: REED 3-1, 3-3, 3-4 REED H4, LCRC4 WHEELER REX 95041
$0.01
-
Cutter Wheel Steel - HS21/2 | RD03502
Blade Exposure: 0.312 inch 7.9mm Application: Steel, Stainless Steel Fits Cutters: REED H21/2
$0.01
-
Mini Cutter 1/8-1 1/8in (3-28mm) - MC3 | RD03495
Mini Cutter 1/8"-1 1/8" (3mm-28mm) MINI TUBE CUTTERS For use in extremely tight places, these tube cutters require minimal swing around the tubing. The MC1 features the smallest cutting radius in the industry and finer thread on screw for easier tightening. The heavy duty MC2 is the strongest mini cutter available. Larger, deeply knurled knob allows easier tightening. MC3 has an even larger capacity
$0.01
-
Mini Cutter 1/8-15/16in (3-24mm) - MC2 | RD03490
Mini Cutter 1/8"-15/16" (3mm-24mm) MINI TUBE CUTTERS For use in extremely tight places, these tube cutters require minimal swing around the tubing. The heavy duty MC2 is the strongest mini cutter available. Larger, deeply knurled knob allows easier tightening. Suits aluminium, brass, copper and steel tube.
$0.01
-
Tube Cutter 1/8 -1 3/8in (6-35mm) - TC14 | RD03475
Tube Cutter 1/8"-1 3/8" (6mm-35mm) STANDARD TUBE CUTTERS For copper, brass, aluminium and thin wall steel. Easy action, enclosed feed screw, grooved rollers, spare cutting wheel and pencil reamer.
$0.01
-
Mini Cutter 1/8-5/8in (4-15mm) - MC1 | RD03470
Mini Cutter 1/8"-5/8" (4mm-15mm) MINI TUBE CUTTERS For use in extremely tight places, these tube cutters require minimal swing around the tubing. The MC1 features the smallest cutting radius in the industry and finer thread on screw for easier tightening. Suits aluminium, brass, copper and steel tube.
$0.01
-
Steel Pipe Cutter w/Guides 1/2-2in - 2-4WG | RD03338
Steel Pipe Cutter w/- Guides 1/2"-2" STANDARD STEEL CUTTERS 4 WHEEL CUTTER WITH GUIDES 1/2"- 2" (21mm - 63mm) cap. Spring tensioned guide bars provide square alignment for four wheel cutters. Best way to get a square cut on stainless steel and corroded pipe. Guide bars also reduce wheel breakage. Features short handle for close quarter work.
$0.01
-
$0.01
-
Low Clearance Rotary Cutter 14-16in - LCRC16 | RD03317
Cut pipe quickly and with minimal digging using Reed Low Clearance Rotary Cutters. The low profile design of the LCRC models needs only 5 inch (127 mm) clearance for up to 16 inch pipe diameter. Safe, clean, straight cuts are easy with these manual-operated cutters. They cold cut large diameter steel, most stainless steel, ductile, and cast iron pipe in close quarters. LCRC cutters are supplied with a slip-on handle that is used to turn and tighten the cutter. With good leverage from the tool's long handle, pipe snaps off squarely before the cutter wheels penetrate halfway through the pipe. Provides a square cut and can be used in close quarters anywhere - in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. With general maintenance and cutter wheel replacement, Reed's Low Clearance Rotary Cutters last for decades. Catalogue No. Item Code Pipe Capacity Cutter Wheel Length Weight Steel in-nom. Cast & Ductile Iron in-nom. actual O.D. mm in mm lbs kg LCRC4I 03306 2-4 60-125 RCI8-30 19 483 9.5 4.3 LCRC4S 03307 2-4 60-125 RCS8-36 19 483 9.5 4.3 LCRC8I 03308 6-8 159-246 RCI8-30 58 1473 41 18.6 LCRC8S 03309 6-8 159-246 RCS8-36 58 1473 41 18.6 LCRC8X 03311 6-8 HeavyWall Steel, Stainless Steel 159-246 RCX 58 1473 41 22.7 LCRC12I 03312 10-12 266-358 RCI8-30 61 1549 50 22.7 LCRC12S 03313 10-14 266-358 RCS8-36 61 1549 50 22.7 LCRC12X 03314 10-14 HeavyWall Steel, Stainless Steel 266-358 RCX 61 1549 50 27.3 LCRC16I 03316 14-16 368-462 RCI8-30 66 1664 60 27.3 LCRC16S 03317 16-18 368-462 RCS8-36 66 1664 60 27.3 LCRC16X 03318 16-18 HeavyWall Steel, Stainless Steel 368-462 RCX 66 1664 60 27.3 SPECIAL ORDER
$0.01
-
$0.01
-
Low Clearance Rotary Cutter 10-14in - LCRC12 | RD03313
Cut pipe quickly and with minimal digging using Reed Low Clearance Rotary Cutters. The low profile design of the LCRC models needs only 5 inch (127 mm) clearance for up to 16 inch pipe diameter. Safe, clean, straight cuts are easy with these manual-operated cutters. They cold cut large diameter steel, most stainless steel, ductile, and cast iron pipe in close quarters. LCRC cutters are supplied with a slip-on handle that is used to turn and tighten the cutter. With good leverage from the tool's long handle, pipe snaps off squarely before the cutter wheels penetrate halfway through the pipe. Provides a square cut and can be used in close quarters anywhere - in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. With general maintenance and cutter wheel replacement, Reed's Low Clearance Rotary Cutters last for decades. Catalogue No. Item Code Pipe Capacity Cutter Wheel Length Weight Steel in-nom. Cast & Ductile Iron in-nom. actual O.D. mm in mm lbs kg LCRC4I 03306 2-4 60-125 RCI8-30 19 483 9.5 4.3 LCRC4S 03307 2-4 60-125 RCS8-36 19 483 9.5 4.3 LCRC8I 03308 6-8 159-246 RCI8-30 58 1473 41 18.6 LCRC8S 03309 6-8 159-246 RCS8-36 58 1473 41 18.6 LCRC8X 03311 6-8 HeavyWall Steel, Stainless Steel 159-246 RCX 58 1473 41 22.7 LCRC12I 03312 10-12 266-358 RCI8-30 61 1549 50 22.7 LCRC12S 03313 10-14 266-358 RCS8-36 61 1549 50 22.7 LCRC12X 03314 10-14 HeavyWall Steel, Stainless Steel 266-358 RCX 61 1549 50 27.3 LCRC16I 03316 14-16 368-462 RCI8-30 66 1664 60 27.3 LCRC16S 03317 16-18 368-462 RCS8-36 66 1664 60 27.3 LCRC16X 03318 16-18 HeavyWall Steel, Stainless Steel 368-462 RCX 66 1664 60 27.3 SPECIAL ORDER
$0.01
-
Low Clearance Rotary Cutter 6-8in - LCRC8 | RD03309
Cut pipe quickly and with minimal digging using Reed Low Clearance Rotary Cutters. The low profile design of the LCRC models needs only 5 inch (127 mm) clearance for up to 16 inch pipe diameter. Safe, clean, straight cuts are easy with these manual-operated cutters. They cold cut large diameter steel, most stainless steel, ductile, and cast iron pipe in close quarters. LCRC cutters are supplied with a slip-on handle that is used to turn and tighten the cutter. With good leverage from the tool's long handle, pipe snaps off squarely before the cutter wheels penetrate halfway through the pipe. Provides a square cut and can be used in close quarters anywhere - in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc. With general maintenance and cutter wheel replacement, Reed's Low Clearance Rotary Cutters last for decades. Catalogue No. Item Code Pipe Capacity Cutter Wheel Length Weight Steel in-nom. Cast & Ductile Iron in-nom. actual O.D. mm in mm lbs kg LCRC4I 03306 2-4 60-125 RCI8-30 19 483 9.5 4.3 LCRC4S 03307 2-4 60-125 RCS8-36 19 483 9.5 4.3 LCRC8I 03308 6-8 159-246 RCI8-30 58 1473 41 18.6 LCRC8S 03309 6-8 159-246 RCS8-36 58 1473 41 18.6 LCRC8X 03311 6-8 HeavyWall Steel, Stainless Steel 159-246 RCX 58 1473 41 22.7 LCRC12I 03312 10-12 266-358 RCI8-30 61 1549 50 22.7 LCRC12S 03313 10-14 266-358 RCS8-36 61 1549 50 22.7 LCRC12X 03314 10-14 HeavyWall Steel, Stainless Steel 266-358 RCX 61 1549 50 27.3 LCRC16I 03316 14-16 368-462 RCI8-30 66 1664 60 27.3 LCRC16S 03317 16-18 368-462 RCS8-36 66 1664 60 27.3 LCRC16X 03318 16-18 HeavyWall Steel, Stainless Steel 368-462 RCX 66 1664 60 27.3 SPECIAL ORDER
$0.01
-
Plumboss Roller Bearing Tube Cutter 5–34mm Stainless Steel | RBCSS5-34
Plumboss Roller Bearing Tube Cutter 5–34mm Stainless Steel Smooth, precise tube cutting with roller bearings The Plumboss Roller Bearing Tube Cutter for stainless steel tube is engineered to handle harder materials while maintaining smooth and accurate cutting performance. The roller bearing support system stabilises the tube during cutting to deliver clean and precise results. Designed for durability in demanding applications, this cutter is ideal for stainless steel tube installations where strength, precision and reliability are required on site.
$0.01
-
Plumboss Roller Bearing Tube Cutter 12–67mm Stainless Steel | RBCSS12-67
Plumboss Roller Bearing Tube Cutter 12–67mm Stainless Steel Smooth, precise tube cutting with roller bearings The Plumboss Roller Bearing Tube Cutter for stainless steel tube is engineered to handle harder materials while maintaining smooth and accurate cutting performance. The roller bearing support system stabilises the tube during cutting to deliver clean and precise results. Designed for durability in demanding applications, this cutter is ideal for stainless steel tube installations where strength, precision and reliability are required on site.
$0.01
-
Plumboss Roller Bearing Tube Cutter 5–34mm Copper | RBCCU5-34
Plumboss Roller Bearing Tube Cutter 5–34mm Copper Smooth, precise tube cutting with roller bearings The Plumboss Roller Bearing Tube Cutter for copper tube is designed to deliver smooth, accurate cuts with minimal effort. The roller bearing support system keeps the tube aligned while cutting, helping produce clean square cuts during plumbing and installation work. Built for durability and reliability on site, this cutter provides controlled cutting performance across a wide range of copper tube sizes. The compact design allows easy use in confined spaces commonly encountered during plumbing and service installations.
$0.01
-
Plumboss Mini Cutter 1/8 -5/8 inch (4mm-15mm) | 127
Mini Cutter 1/8"-5/8" (4mm-15mm) MINI CUTTERS For use in extremely tight places, these tube cutters require minimal swing around the tubing.
$0.01
You have seen 89 out of 89 products
Our comprehensive range of pipe and tube cutting tools, from traditional manual cutters to advanced machine solutions. Our offerings cater to the diverse needs of plumbers seeking accuracy and speed on their projects.
Our products encompass a variety of cutting methods, including traditional hacksaws, pipe cutters, and innovative tubing cutters. Whether you're dealing with copper, PVC, PE, Ductile, Steel or other materials, our tools are designed to provide clean, burr-free cuts, ensuring optimal fit and sealing for your plumbing installations.
Experience enhanced productivity and minimized downtime with our ergonomic designs and durable construction, crafted to withstand the rigors of daily use in demanding plumbing environments. Trust in our range of pipe and tube cutting solutions to streamline your workflow and achieve professional results with every cut.
