Pipe Working Tools
-
Plumboss Poly Squeeze Off 20-63mm with Chain | PSO20-63
For mains 20mm to 63mm diameter, a manual model is available that utilises a threaded T-bar which on rotation advances a squeeze bar to compress the polyethylene pipe. To prevent the pipe being over squeezed, the tool incorporates limit stops for various polyethylene pipe sizes.
$0.01
-
Plumboss Plumbers Probe 1200mm | PP1200
PLUMBERS PROBE (NON INSULATED) - for locating underground plumbing services - 1200mm long
$0.01
-
Path Key/Water Key 13mm (Version 2) | PATHK-2
Path Key/Water Key 13mm (Version 2) Extended reach key for tap and valve operation The Plumboss Path/Water Key is designed for opening taps and valves in hard-to-reach locations, making it ideal for civil, plumbing and utility applications. With a 1200mm length, it allows operators to safely access recessed or underground valves without the need for excessive bending or reaching. Made in Australia from high-quality zinc-plated steel, it offers excellent corrosion resistance and long-term durability in demanding environments. The T-handle design includes a handy chisel tip, allowing easier positioning and improved engagement when operating valves.
$0.01
-
T Lid Lifter 430mm Long | LT3
T Lid Lifter 430mm Long Compact, portable lifter for lightweight manhole lids The Plumboss LT3 T Lid Lifter is a compact tool designed for safely lifting lightweight manhole lids and access covers. At 430mm long, it offers a practical balance of portability and leverage, making it ideal for everyday plumbing and civil applications where quick access is required. Made in Australia from high-quality zinc-plated steel, it delivers excellent corrosion resistance and long-term durability on site. The T-handle design includes a handy chisel tip, allowing easier engagement with lids and covers while improving control during lifting. For heavier or seized lids, refer to the Plumboss range of ultra-heavy-duty gatic lifters.
$0.01
-
CST2 - Pipe Freezing Kit Cold Shot | GS-118020
No need to drain water lines, sprinkler systems, or hot water systems before cutting pipe or tubing. The Cold-Shot keeps pressurized systems operating while you make repairs.It freezes all type of liquids in steel, copper, cast iron, aluminum, and plastic pipes ranging from 1/8" to 2" (10 mm - 60 mm) using carbon dioxide (CO2). Dip-tube type cylinders are available at all welding supply houses. The Cold-Shot is faster and less expensive than "refrigerator-type" units faster and uses less CO2 than "bag-type" units. In five minutes you are ready to go to work on copper tubing, just three minutes for cast iron pipe. The Cold-Shot is easy to use. Just place the freeze head around the pipe, attach the hose, and open the cylinder valve. Liquid carbon dioxide will flow into the freeze head and form dry ice with a temperature of minus 110F (-79C). That's cold enough to form an ice pack that can withstand 7,000 psi, yet won't damage pipes. Kit includes 10 sets of freeze heads for 1/8" to 2" lines (10mm to 60mm), two high pressure spiral hoses with injectors, T-distributor, locking nut, hex head screwdriver, rubber gloves, goggles and carrying case
$0.01
-
freezeBOSS Pipe Freeze Ultimate Valve | FBU-V
Replacement valve for use with all freezeBOSS Pipe Freezing Kits.
$0.01
-
freezeBOSS Pipe Freeze Ultimate Replacement Nylon | FBU-TUBE
Replacement 1 metre length of nylon tube for use with freezeBOSS Pipe Freezing Kits
$0.01
-
freezeBOSS Pipe Freeze Ultimate T-Piece | FBU-T
Replacement double freeze equal T-Connector for use with all freezeBOSS Freezing Kits
$0.01
-
freezeBOSS Pipe Freeze Intense Jacket 8-15mm (Yellow) | FBU-J8-15
Re-usable freezing jackets made in high quality rip-stop nylon for use with all freezeBOSS Ultimate Pipe Freezing Kits Available in 5 sizes to fit various pipes 8-15mm, 15-22mm, 28-35mm, 35-42mm, 42-61mm Product Code Description Colour PB-FBU-J8-15 freezeBOSS Ultimate Pipe Freeze Jacket 8-15mm Yellow PB-FBU-J15-22 freezeBOSS Ultimate Pipe Freeze Jacket 15-22mm Green PB-FBU-J25-35 freezeBOSS Ultimate Pipe Freeze Jacket 25-35mm Red PB-FBU-J35-42 freezeBOSS Ultimate Pipe Freeze Jacket 35-42mm White PB-FBU-J42-61 freezeBOSS Ultimate Pipe Freeze Jacket 42-61mm Black
$0.01
-
freezeBOSS Pipe Freeze Intense Jacket 35-42mm (White) | FBU-J35-42
Re-usable freezing jackets made in high quality rip-stop nylon for use with all freezeBOSS Ultimate Pipe Freezing Kits Available in 5 sizes to fit various pipes 8-15mm, 15-22mm, 28-35mm, 35-42mm, 42-61mm Product Code Description Colour PB-FBU-J8-15 freezeBOSS Ultimate Pipe Freeze Jacket 8-15mm Yellow PB-FBU-J15-22 freezeBOSS Ultimate Pipe Freeze Jacket 15-22mm Green PB-FBU-J25-35 freezeBOSS Ultimate Pipe Freeze Jacket 25-35mm Red PB-FBU-J35-42 freezeBOSS Ultimate Pipe Freeze Jacket 35-42mm White PB-FBU-J42-61 freezeBOSS Ultimate Pipe Freeze Jacket 42-61mm Black
$0.01
-
freezeBOSS Pipe Freeze Jacket 22-35mm (Red) | FBE-J22-35
Re-usable freezing jackets made in high quality rip-stop nylon for use with all freezeBOSS Extreme Pipe Freezing Kits
$0.01
-
$0.01
-
freezeBOSS Pipe Freeze Intense Jacket 15-22mm (Green) | FBU-J15-22
Re-usable freezing jackets made in high quality rip-stop nylon for use with all freezeBOSS Ultimate Pipe Freezing Kits Available in 5 sizes to fit various pipes 8-15mm, 15-22mm, 28-35mm, 35-42mm, 42-61mm Product Code Description Colour PB-FBU-J8-15 freezeBOSS Ultimate Pipe Freeze Jacket 8-15mm Yellow PB-FBU-J15-22 freezeBOSS Ultimate Pipe Freeze Jacket 15-22mm Green PB-FBU-J25-35 freezeBOSS Ultimate Pipe Freeze Jacket 25-35mm Red PB-FBU-J35-42 freezeBOSS Ultimate Pipe Freeze Jacket 35-42mm White PB-FBU-J42-61 freezeBOSS Ultimate Pipe Freeze Jacket 42-61mm Black
$0.01
-
freezeBOSS Pipe Freeze Intense Dosing Scale | FBU-DS
Replacement freezeBOSS refrigerant dosing scales, calibrated to allow accurate dosing of freezeBOSS Spray and minimise refrigerant wastage.
$0.01
-
freezeBOSS Pipe Freeze Ultimate Refill 700g | FBU-700
Contains 700g (580ml) refrigerant which is sufficient for 7 individual freezes on 15mm copper pipe Freezes pipes in as little as 90 seconds Ice plugs last up to 45 minutes Freezes to minus 50 degrees
$0.01
-
freezeBOSS Pipe Freeze Intense Jacket | FBI-J
Replacement jacket for freezeBOSS INTENSE Pipe Freezing Kit.
$0.01
-
freezeBOSS INT/EXT Replacement Can 500g 415ml | FBI-E500
freezeBOSS INT/EXT Replacement Can 500g 415ml High-performance freeze spray for creating fast, reliable pipe freeze plugs The freezeBOSS Replacement Can is designed for use with freezeBOSS pipe freezing kits, delivering fast and reliable freezing performance for pipe maintenance and repair. Suitable for both FBE8-35 and FBI8-28 kits, it provides a simple replacement solution to keep your system operating effectively on-site. Capable of reaching temperatures down to -50°C, this refrigerant creates strong ice plugs that allow work to be carried out without draining the system. The freeze forms quickly, typically within 5 minutes, and can last for up to 45 minutes, withstanding pressures exceeding 230psi for dependable performance during repairs. Each 415mL (500g) aerosol can provides multiple freeze applications, making it a practical solution for ongoing maintenance work. Designed and manufactured in Australia, it delivers consistent performance across a range of pipe sizes and applications. Compatibility: Plumboss freezeBOSS FBE8-35 Kit Plumboss freezeBOSS FBI8-28 Kit Coverage: 2 x 8–15mm freezes 1 x 22mm or 28mm freeze
$0.01
-
Plumboss Blade to suit Drillchamf Tool | DRILLCHAMF-B
Blade to suit DRILLCHAMF
$0.01
-
Plumboss Drill Chamfering Tool 110-160mm | DRILLCHAMF160
The Plumboss Drill Chamfering Tool is designed to quickly and consistently chamfer plastic pipe using a standard drill. It automatically adjusts to the pipe's outer diameter using centripetal force, ensuring a smooth, even bevel without manual setup or repositioning. Suitable for pipe sizes from 110-160mm, this tool is ideal for preparing PVC and other plastic pipes for joining, improving fit-up and reducing installation time. Compatible with cordless or corded drills, it delivers efficient on-site performance at low RPM, making it a practical solution for repetitive pipe-preparation tasks. The self-adjusting design reduces operator error and ensures consistent results across multiple pipe sizes, making it well-suited for high-volume installations. Its compact form allows for easy handling in tight spaces, while maintaining control and accuracy throughout the chamfering process.
$0.01
-
Plumboss Drill Chamfering Tool 75–110mm | DRILLCHAMF
Plumboss Drill Chamfering Tool 75–110mm Fast, consistent pipe chamfering using a standard drill The Plumboss Drill Chamfering Tool is designed to quickly and consistently chamfer plastic pipe using a standard drill. It automatically adjusts to the pipe's outer diameter using centripetal force, ensuring a smooth, even bevel without manual setup or repositioning. Suitable for pipe sizes from 75–110mm, this tool is ideal for preparing PVC and other plastic pipes for joining, improving fit-up and reducing installation time. Compatible with cordless or corded drills, it delivers efficient on-site performance at low RPM, making it a practical solution for repetitive pipe-preparation tasks. The self-adjusting design reduces operator error and ensures consistent results across multiple pipe sizes, making it well-suited for high-volume installations. Its compact form allows for easy handling in tight spaces, while maintaining control and accuracy throughout the chamfering process. Note: This tool is not recommended for blue brute pipe.
$0.01
-
Plumboss Sluice Valve Key 1 1-4 inch square 900mm | SVK02
For activating a range of sluice and ball valves Head:1 ¼‚¬ (32mm) tapered square head Length: 900mm Solid steel construction
$0.01
-
Plumboss Stainless Poly Squeeze-off Tool | PESS01
Made in Australia from precision machined stainless steel and brass for smooth action & durability. Ideal for squeezing off poly gas & water lines. 0-32 mm capacity. Secured bottom bar. A must have tool for repair and emergency work.
$0.01
-
Plumboss Fibreglass Soil Probe Rod 4ft | INSULPROBE
Used to locate underground utility lines, Reed Fiberglass Probe Rods are certified non-conductive. The four foot soil probe has a metal tip and offers comparable strength and durability to other fiberglass probe rods in the industry.
$0.01
-
Plumboss Standard D Handle Gatic Lifter | GLSD1
Standard D Handle Gatic Lifter Controlled lifting for stubborn manhole lids The Plumboss Standard D Handle Gatic Lifter is designed to safely and efficiently open tough or wedged manhole lids. Using a simple three-step operation, it allows operators to apply controlled lifting force, making it ideal for civil, plumbing and maintenance applications. Built for demanding environments, the lifter features a fabricated steel construction rather than cast components, eliminating weak points and improving durability. The solid plate steel head and robust design ensure reliable performance when handling heavy covers, while the D-handle provides control and leverage during operation.
$0.01
You have seen 72 out of 81 products
