Plumboss
-
Plumboss Fixed Leg Pipe Stand V Head | PS-FXD-V
Fixed Leg Pipe Stand - V Head Built For The Trade The Fixed Leg Pipe Stand with V Head is designed for reliable, everyday use on site or in the workshop. Strong, stable, and easy to adjust, it provides dependable support for pipe fabrication, welding, and fitting tasks. A precision-adjusting screw allows quick and accurate height adjustment to suit the job at hand. Once set, a hardened steel locking ring holds the stand securely in position, reducing wear and helping maintain performance over years of use. This simple, proven design makes these pipe jacks a long-lasting choice for professional trades. All external surfaces are powder-coated and zinc phosphate-plated to help resist corrosion in tough working environments. With a wide working height range and verified load testing, this pipe stand delivers the strength and reliability plumbers and fabricators expect. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -
$0.01
-
Plumboss Fixed Leg Pipe Stand Roller Head | PS-FXD-R
Plumboss Fixed Leg Pipe Stand - Roller Head Fixed Leg Stability with Roller Head Rotation The Plumboss Fixed Leg Pipe Stand with Roller Head is designed for professional trade use where maximum stability and controlled pipe rotation are required. The fixed leg design provides a solid base, while the adjustable roller head allows pipe to rotate smoothly, making positioning and handling easier during fabrication and welding. A convenient adjusting screw allows fast and accurate height adjustment to achieve the correct working position. Once set, a hardened steel locking ring secures the height, helping reduce movement under load and extending the service life of the stand. This proven mechanism delivers reliable performance in demanding work environments. All external surfaces are powder-coated and zinc phosphate-plated to resist corrosion. With a wide working height range and heavy-duty load capacity, this pipe stand provides dependable support for rotating, welding, and general pipe handling tasks. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -
$0.01
-
Plumboss Folding Leg Pipe Stand V Head Stainless Steel | PS-FLD-VSS
Plumboss Folding Leg Pipe Stand – V Head Stainless Steel Stainless Steel V Head with Increased Rigidity and Control The Plumboss Folding Leg Pipe Stand with Stainless Steel V Head is a deluxe version designed for professional applications where increased rigidity, material protection, and control are required. The folding leg design allows for easy transport and compact storage while maintaining strong on-site stability. An epoxy-coated stainless steel V head reduces scratching on pipe surfaces and eliminates arcing, making this stand well-suited to fabrication and welding environments. Height adjustment is controlled via a convenient adjusting screw, with a locking pin on the height-adjusting slide tube providing added security under load. Additional rigidity is achieved through a tightening handle on the leg brace sliding ring, allowing the legs to be locked securely in any position. These enhancements improve overall stability and weight handling compared to the standard model. All external surfaces are powder-coated and zinc phosphate-plated to resist corrosion in demanding work conditions. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -
$0.01
-
Plumboss Folding Leg Pipe Stand V Head | PS-FLD-V
Folding Leg Pipe Stand - V Head Folding Leg Design for Easy Transport and Storage The Plumboss Folding Leg Pipe Stand with V Head is designed for professional trade use where portability and stability are equally important. The folding leg design allows the stand to be quickly collapsed for transport and storage, making it ideal for site work and mobile applications. A convenient adjusting screw provides fast and accurate height adjustment to achieve the correct working position. Once set, a hardened steel locking ring secures the height in place, helping reduce movement under load and extending the working life of the stand. This proven mechanism delivers reliable performance over years of use. All external surfaces are powder-coated and zinc phosphate-plated to resist corrosion in tough working environments. With a wide working height range and verified load testing, this pipe stand offers dependable support for fabrication, welding, and general pipe handling tasks. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -
$0.01
-
Plumboss Folding Leg Pipe Stand Roller Head | PS-FLD-R
Plumboss Folding Leg Pipe Stand – Roller Head Roller Head for Easy Pipe Rotation The Plumboss Folding Leg Pipe Stand with Roller Head is designed for professional trade use where controlled pipe rotation is required. The adjustable roller head allows pipe to turn smoothly on the stand, making it easier to position and work on various pipe sizes during fabrication and fitting. A convenient adjusting screw provides fast and accurate height adjustment to achieve the correct working position. Once set, a hardened steel locking ring secures the height, helping reduce movement under load and extending the service life of the stand. The folding leg design allows the stand to collapse for easy transport and compact storage, making it ideal for site work. All external surfaces are powder-coated and zinc phosphate-plated to resist corrosion in tough working environments. With a wide working height range and a heavy-duty load capacity, this pipe stand delivers reliable support for rotating, welding, and handling pipe. Pipe Stand Comparison Table Fixed Leg Folding Leg Short Folding Leg Attachments V Head PS-FXD-V PS-FLD-V PS-SFLD-V PS-VH Large V Head PS-FXD-LVH PS-FLD-LVH PS-SFLD-LVH PS-LVH SS V Head PS-FXD-VSS PS-FLD-VSS PS-SFLD-VSS - Roller Head PS-FXD-R PS-FLD-R PS-SFLD-R PS-RA, PS-RH Ball Transfer - - - PS-BTH Stand Only - - PS-SFLD -
$0.01
-
Plumboss Plug Safe - Right Angle Adaptor with 6in Test Plug | PSBW-6PS
Plumboss Plug Safe - Right Angle Adaptor with 6in Test Plug External tightening test plug system The Plumboss Plug Safe system is an Australian-made solution designed to prevent losing test plugs down inspection openings while allowing tightening from outside the pipe. The zinc‑plated steel adaptor features a 200mm handle so the plug can be installed and tightened externally, keeping hands clear of the pipe and reducing the risk of cuts, abrasions and lost plugs. Using a screw and wedge mechanism, the Plug Safe system grips significantly tighter than standard hand tightening. Ideal for pipe stopping, pressure testing and maintenance work where inspection openings limit access inside the pipe. Operating Pressure Sizes This is a guide to the maximum back pressure for different types and sizes of test plugs. These pressures will vary depending on the cleanliness and condition of the pipe bore and the ambient temperature. ½” (12.5mm) to (30mm) 30 psi 1½” (40mm) to (300mm) 7 psi 13” (325mm) to (1200mm) 5 psi Over 40” (1200mm) 3 psi
$0.01
-
Plug Safe | Right Angle Adaptor With 4 In Test Plug | PSBW-4PS
Plug Safe | Right Angle Adaptor With 4 In Test Plug External tightening test plug system The Plumboss Plug Safe system is an Australian-made solution designed to prevent losing test plugs down inspection openings while allowing tightening from outside the pipe. The zinc‑plated steel adaptor features a 200mm handle so the plug can be installed and tightened externally, keeping hands clear of the pipe and reducing the risk of cuts, abrasions and lost plugs. Using a screw and wedge mechanism, the Plug Safe system grips significantly tighter than standard hand tightening. Ideal for pipe stopping, pressure testing and maintenance work where inspection openings limit access inside the pipe. Operating Pressure Sizes This is a guide to the maximum back pressure for different types and sizes of test plugs. These pressures will vary depending on the cleanliness and condition of the pipe bore and the ambient temperature. ½” (12.5mm) to (30mm) 30 psi 1½” (40mm) to (300mm) 7 psi 13” (325mm) to (1200mm) 5 psi Over 40” (1200mm) 3 psi
$0.01
-
Plumboss Dual Size Power Plunger 100mm & 150mm x 1200 Long | PP6S
Designed for heavy duty 4" and 6" plunging, these units utilise a solid galvanised bar and heavy duty rubber for the more serious plunging needs. Product Code Description PP6S POWER PLUNGER 1200mm X 4 & 6 inch PP6L POWER PLUNGER 1900mm X 4 & 6 inch
$0.01
-
Dual Size Power Plunger 100mm & 150mm x 1900mm Long | PP6L
Dual-Size Power Plunger 150 x 1900mm Long Maximum reach and force for clearing tough blockages The Plumboss Power Plunger is designed for clearing stubborn drain blockages where reach and force are critical. Featuring a long 1900mm handle, it allows operators to apply strong, controlled pressure deep into pipework, making it ideal for sewer and stormwater applications. Built for heavy-duty use, the plunger utilises a solid galvanised steel bar and heavy-duty rubber heads to deliver powerful plunging action. The dual-size design (100mm and 150mm) provides versatility across 4" and 6" pipes, making it suitable for both domestic and commercial drain-clearing tasks. Product Code Description PP6S POWER PLUNGER 1200mm X 4 & 6 inch PP6L POWER PLUNGER 1900mm X 4 & 6 inch
$0.01
-
Plumboss Stainless Poly Squeeze-off Tool | PESS01
Made in Australia from precision machined stainless steel and brass for smooth action & durability. Ideal for squeezing off poly gas & water lines. 0-32 mm capacity. Secured bottom bar. A must have tool for repair and emergency work.
$0.01
-
Plumboss Medium Carpenters Pencil - Box of 72 | PCR01C
Box of 72 plumBOSS Carpenter's pencils A basic must have for anyone in construction
$0.01
-
Plumboss Pipe Expander Set | PBEXP
plumBOSS Expander 1/2", 3/4" & 1" Plier type expanders that expand ½",¾" & 1" tubing. Additional heads can be added to expand up to 1 ½" tubing. Also available in 1/2" increments for refrigeration sizes Heads made of stainless steel, not plated mild steel.
$0.01
-
Plumboss Quick Flare 1/2inch and 3/4inch | P218
Quick Flare 1/2 and 3/4 inch Flaring Tools Quick flare is a fast economical way of flaring 1/2 and 3/4 inch copper tube. Tube is inserted into tool and clamped by squeezing handles together, flare pins are then hit with a hammer until desired flare is formed.
$0.01
-
$0.01
-
$0.01
-
Plumboss Swift Slice 1/2 inch | KPS12
Swift Slice 1/2 inch Fast, one-handed cutting for copper tube The Plumboss Swift Slice is the fastest way to cut 1/2" copper tubing, designed for speed, simplicity and ease of use on site. The integrated self-adjusting mechanism eliminates the need to manually tighten or adjust the cutting wheel—simply position the tool and twist to achieve a clean cut in seconds. Built for efficiency, the compact design allows for one-handed operation, making it ideal for working in tight spaces where traditional tube cutters are difficult to use. With minimal effort required, it delivers consistent, clean cuts every time, helping speed up installation and reduce fatigue during repetitive tasks.
$0.01
-
Plumboss Branchforming Tool Kit (No.2) ½-2 inch | KKB02
Manual Collaring Tools (KK Series) 2 inch Manual Branchforming kit KKB02 Kit Contains 1/2 inch Branch former 3/4 inch Branch former 1 inch Branch former 1 1/4 inch Branch former 1 1/2 inch Branch former 2 inch Branch former Adjustable Drill 3/8 - 2 1/8 inch Ratchet Wrench Marking Pliers File & Handle Plastic Tool Box The Original KK Hand Operated Branchforming Equipment Eliminates up to 90% of T-fitting purchases Reduces inventory One braze joint replaces 3 soldered joints No need for tube cutting Reduces tube preparation time Less assembly time Reduces scrap on the job 66% fewer joints Less chance for leaks or call backs Branch Puller / Branch Pulling Device
$0.01
-
Plumboss Fibreglass Soil Probe Rod 4ft | INSULPROBE
Used to locate underground utility lines, Reed Fiberglass Probe Rods are certified non-conductive. The four foot soil probe has a metal tip and offers comparable strength and durability to other fiberglass probe rods in the industry.
$0.01
-
Plumboss Hacksaw Blade Bimetal 24tpi (Min 10) | HBBM24
Field tested tough for over 6 years
$0.01
-
Plumboss Gully Scoop 7ft x 6 inch | GS706
The plumBOSS Gully Scoop is made of zinc-plated steel. Avoid being injured by sharp objects in pipes. Avoid danger from poisonous creatures that might be in pipes. Works better than any other hook or hooking device. Grab with a positive grip, toys, rocks, gravel, dirt, syringes, balls, snakes, etc. Use in DTs, Stormwater gullies, boundary traps, pits and even post holes to remove dirt. Available in different sizes if required, up to 7ft long with a scoop to suit 6 inch pipe.
$0.01
-
Plumboss Gully Scoop 7ft x 4 inch | GS704
The plumBOSS Gully Scoop is made of zinc-plated steel. Avoid being injured by sharp objects in pipes. Avoid danger from poisonous creatures that might be in pipes. Works better than any other hook or hooking device. Grab with a positive grip, toys, rocks, gravel, dirt, syringes, balls, snakes, etc. Use in DTs, Stormwater gullies, boundary traps, pits and even post holes to remove dirt. Available in different sizes if required, up to 7ft long with a scoop to suit 6 inch pipe.
$0.01
-
Plumboss Gully Scoop 5ft x 6 inch | GS506
The plumBOSS Gully Scoop is made of zinc-plated steel. Avoid being injured by sharp objects in pipes. Avoid danger from poisonous creatures that might be in pipes. Works better than any other hook or hooking device. Grab with a positive grip, toys, rocks, gravel, dirt, syringes, balls, snakes, etc. Use in DTs, Stormwater gullies, boundary traps, pits and even post holes to remove dirt. Available in different sizes if required, up to 7ft long with a scoop to suit 6 inch pipe.
$0.01
-
Plumboss Gully Scoop 5ft x 4 inch | GS504
The plumBOSS Gully Scoop is made of zinc-plated steel. Avoid being injured by sharp objects in pipes. Avoid danger from poisonous creatures that might be in pipes. Works better than any other hook or hooking device. Grab with a positive grip, toys, rocks, gravel, dirt, syringes, balls, snakes, etc. Use in DTs, Stormwater gullies, boundary traps, pits and even post holes to remove dirt. Available in different sizes if required, up to 7ft long with a scoop to suit 6 inch pipe.
$0.01
-
Plumboss Gully Scoop 5ft x 3 inch | GS503
The plumBOSS Gully Scoop is made of zinc-plated steel. Avoid being injured by sharp objects in pipes. Avoid danger from poisonous creatures that might be in pipes. Works better than any other hook or hooking device. Grab with a positive grip, toys, rocks, gravel, dirt, syringes, balls, snakes, etc. Use in DTs, Stormwater gullies, boundary traps, pits and even post holes to remove dirt. Available in different sizes if required, up to 7ft long with a scoop to suit 6 inch pipe.
$0.01
You have seen 456 out of 795 products
