Description
Power Vee
With Power Cable feed - Works Great in Tight Places
We have miniaturized our big machine power cable feed and put it on the Super-Vee to give you feeding speed and convenience you have not seen before in a hand-held power drain cleaner. In tight or awkward places, the Power-Vee is like having an extra hand.
To feed the cable just start the Power-Vee and squeeze the feed lever; to retract it, reverse the motor and squeeze the lever. The feed handles 1/4", 5/16" and 3/8" cables. No adjustment, disassembly, or additional parts required.
Our Dyna-Thrust bearing system helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and
extending the life of the tool. Also adding to the Power-Vee's durability is the heavy-gauge stamped aluminum drum. Of course the cables are Flexicore - with an integral wire rope center. Nobody makes cables like General.
- Feed 3/8" cable at 16 feet per minute
- The feed handles 1/4", 5/16" and 3/8" cables - no adjustment disassembly or additional parts required.
- Uses left hand wound Flexicore cables for maximum strength
- With Quick-Change Cable Cartridges
Motor |
All ball-bearing, double-insulated, reversible motor with variable speed control 0 - 500 rpm.
|
| Drum |
Heavy gauge stamped aluminum with inner drum to prevent cable tangling |
| Capacity |
50 ft. of 1/4" or 5/16" cable; 35 ft. of 3/8" cable. All cables are left hand wound and reinforced with a wire rope center |
| Cutter Set |
Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4" Side Cutter Blade, Flexible Arrow Head |
| Cable Cartridges |
1/2 hp with capacitor, forward-off-reverse switch, 20 ft. power cord and ground fault circuit interrupter. |
| Power Feed |
Feeds 3/8" cable at 16 feet per minute |
Find a Retailer
